Here you go.
| Attachments: |
0002001P.7z [609.17 KiB]
Downloaded 726 times |
| HDD GURU FORUMS http://forum.hddguru.com/ |
|
| resources for WD40NMZW http://forum.hddguru.com/viewtopic.php?f=11&t=38282 |
Page 1 of 1 |
| Author: | sathyan [ April 5th, 2019, 9:41 ] |
| Post subject: | resources for WD40NMZW |
This drive WD 4TB drive (SpyGlass 2.5") USB drive stays busy WD40NMZW-11GX6S1 converted to SATA , shifted SA regions Address, and detects and shows... Techno mode key Techno mode key......................... : Ok RAM: SA HDD has unknown capacity. SA CHS access may operates wrongly HDD Info reading........................ : Ok Heads number............................ : 10 Cyl Count............................... : 384 ROM: Read ROM................................ : Ok ROM Data size........................... : 512 Kb Flash ROM dir reading................... : Ok Flash ROM dir reading (Ext)............. : Ok (Active) Modules directory address............... : 809 245 SA regions address...................... : shifted Module 02 access........................ : Granted SA Translator loading................... : Ok SA defects assigned..................... : 5 ROM Modules: ROM version............................. : 02.1PR ROM F/W version......................... : 0002001P Overlay F/W version..................... : 02.1PR Servo F/W version....................... : F1.3R Heads configuration..................... : by map Heads number............................ : 10 Heads number in use..................... : 10 Switched off heads...................... : No Heads map............................... : 0,1,2,3,4,5,6,7,8,9 Having read the warnings and difficulties regarding this model, trying to backup original modules first. any help appreciated. thanks |
|
| Author: | ddrecovery [ April 5th, 2019, 9:48 ] |
| Post subject: | Re: resources for WD40NMZW |
Have you tried a loader yet? If not you need to find a loader with the same firmware from a donor. The loader direct from the drive will not work. |
|
| Author: | sathyan [ April 5th, 2019, 16:19 ] |
| Post subject: | Re: resources for WD40NMZW |
ddrecovery wrote: Have you tried a loader yet? If not you need to find a loader with the same firmware from a donor. The loader direct from the drive will not work. Thanks @ ddrecovery.... searching for loader, yet to find a match.(firmware- 0002001P) |
|
| Author: | ddrecovery [ April 5th, 2019, 17:12 ] | ||
| Post subject: | Re: resources for WD40NMZW | ||
Here you go.
|
|||
| Author: | sathyan [ April 8th, 2019, 7:06 ] | ||
| Post subject: | Re: resources for WD40NMZW | ||
Thanks @ ddrecovery... the loader matched. able to reach SA and test modules Heads test:- H (0) and H (1) tests bad h(2) to H (9) are OK Reading Modules(composite mode): The following modules are read with errors 6F 2D 12D 189 190 SA structure test gives Relo list structure error(3) for both copies 0 and 1 attached the log and SA test report Backed up the modules and tracks.. any pointers to the next step appreciated thanks
|
|||
| Author: | ddrecovery [ April 8th, 2019, 12:06 ] |
| Post subject: | Re: resources for WD40NMZW |
H0 and H1 are obviously very weak, but looks like the can still read. Can you get the drive to boot up normally by using the loader and changing the head map in RAM? If not you may need a head swap. |
|
| Author: | sathyan [ April 8th, 2019, 14:37 ] |
| Post subject: | Re: resources for WD40NMZW |
@ ddrecovery... thanks for your suggestion, will try and get back |
|
| Author: | mopakarim [ June 14th, 2019, 13:31 ] |
| Post subject: | Re: resources for WD40NMZW |
sathyan wrote: @ ddrecovery... thanks for your suggestion, will try and get back Have you tried a loader yet? If not you need to find a loader with the same firmware from a donor. The loader direct from the drive will not work. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|
