Main » Forums home » PC-3000 support forum

All times are UTC - 5 hours [ DST ]



Post new topic Reply to topic  Page 1 of 1
  [ 8 posts ] 
  Print view Previous topic | Next topic 
Author Message
Loutrage
 Post subject: No data access on a WD10JMVW-11AJGS2 (USB HDD)
PostPosted: October 17th, 2019, 10:26 
Offline

Joined: October 17th, 2019, 7:44
Posts: 4
Location: Belgium
Hello,

We try to obtain an access to the data on a hard drive WDC WD10JMVW-11AJGS2 with PC3000 connected in USB3 directly.

In the Disk Management, Windows asks to intialize it.

In PC3000, the hard drive is automatically detected as the FBLite 2.5" Family (in WD), here is the HDD ID info :

Code:
   Model : WDC WD10JMVW-11AJGS2
  Serial : WD-WX51AC308918
Firmware : 01.01A01
Capacity : 1 000 GB (1 953 459 633)


We made a backup of the ROM/Module/SA tracks without error.

We made a Scan and remap defects and here is the result :

Code:
Initial LBA............................. : 0
Final LBA............................... : 1 953 459 632
Test type............................... : Verify
Error Code : 51AD....................... : Unknown error code: 51AD

View module 90 information
Total heads............................. : 4
Used heads.............................. : 4
Mdl 47 version.......................... : 1005jB05
ROM Version version..................... : 00160018 (16.18)
Mdl 11 Version.......................... : 00160018 (16.18)

Scan and remap defects
Initial LBA............................. : 0
Final LBA............................... : 1 953 459 632
Test type............................... : Verify
SAT command sending error: Illegal Request : Invalid Field in CDB
Techno ON............................... : Ok


We have these error :
- Error Code : 51AD....................... : Unknown error code: 51AD
- SAT command sending error: Illegal Request : Invalid Field in CDB

When we try to open it with Data Extractor, we received this message

Code:
Operation aborted
Catastrophic failure
Error Read LBA: 0


What can we do ?

Thank you !
Top
 Profile  
 
HaspHL
 Post subject: Re: No data access on a WD10JMVW-11AJGS2 (USB HDD)
PostPosted: October 17th, 2019, 19:53 
Offline

Joined: March 4th, 2019, 8:33
Posts: 71
convert to SATA
Top
 Profile  
 
pclab
 Post subject: Re: No data access on a WD10JMVW-11AJGS2 (USB HDD)
PostPosted: October 18th, 2019, 3:28 
Offline
User avatar

Joined: July 12th, 2010, 4:38
Posts: 1303
Location: Portugal
HaspHL wrote:
convert to SATA


+1

_________________
http://www.pclab.com.pt facebook.com/PCLAB.Assistencia.Tecnica
ACELab partner
Top
 Profile  
 
Loutrage
 Post subject: Re: No data access on a WD10JMVW-11AJGS2 (USB HDD)
PostPosted: October 18th, 2019, 4:59 
Offline

Joined: October 17th, 2019, 7:44
Posts: 4
Location: Belgium
Thank you for the answers ! We will follow this guide https://blog.acelaboratory.com/pc-3000- ... drive.html

So with a replacement of the PCB (and import of the info of the patient PCB), you think it should be works ?

Do have you an idea what is the cause of the problem ?
Top
 Profile  
 
MindMergepk
 Post subject: Re: No data access on a WD10JMVW-11AJGS2 (USB HDD)
PostPosted: October 18th, 2019, 11:54 
Offline
User avatar

Joined: December 8th, 2013, 4:48
Posts: 830
Location: Pakistan
HaspHL wrote:
convert to SATA


+2

_________________
Data Recovery Pakistan
Top
 Profile  
 
northwind
 Post subject: Re: No data access on a WD10JMVW-11AJGS2 (USB HDD)
PostPosted: October 22nd, 2019, 5:19 
Offline
User avatar

Joined: January 28th, 2009, 10:54
Posts: 3128
Location: Greece
MindMergepk wrote:
HaspHL wrote:
convert to SATA


+2

+3
Loutrage wrote:
Do have you an idea what is the cause of the problem ?


You cannot really diagnose a drive over USB (unless it's clicking etc).
Convert to SATA and then see behavior.

_________________
http://www.northwind.gr
SandForce SSD Recovery
Ransomware Reverse Engineering - NoMoreRansom! partners
Top
 Profile  
 
Loutrage
 Post subject: Re: No data access on a WD10JMVW-11AJGS2 (USB HDD)
PostPosted: October 22nd, 2019, 8:45 
Offline

Joined: October 17th, 2019, 7:44
Posts: 4
Location: Belgium
Hello !

Thank you for the answers. We succesfuly attach a SATA connector with soldering (see in attachment).

After that, we had "ABR" error.

We succeed to access to the data with a regeneration translator then a Clear SMART and a hard reset.

After that, we can recover the data with Data Extractor !


Attachments:
IMG_20191021_163109.jpg
IMG_20191021_163109.jpg [ 185.82 KiB | Viewed 4299 times ]
Top
 Profile  
 
pclab
 Post subject: Re: No data access on a WD10JMVW-11AJGS2 (USB HDD)
PostPosted: October 23rd, 2019, 8:56 
Offline
User avatar

Joined: July 12th, 2010, 4:38
Posts: 1303
Location: Portugal
And why not getting a SATA PCB, Read ROM from patient PCB, write on donor PCB and that's it?
A lot faster.

_________________
http://www.pclab.com.pt facebook.com/PCLAB.Assistencia.Tecnica
ACELab partner
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 8 posts ] 

Main » Forums home » PC-3000 support forum

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 8 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Switch to mobile style
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group