HDD GURU FORUMS
http://forum.hddguru.com/

What technically happen if m0,2,2 etc command interrupted?
http://forum.hddguru.com/viewtopic.php?f=11&t=40481
Page 1 of 1

Author:  smecca [ October 14th, 2020, 9:22 ]
Post subject:  What technically happen if m0,2,2 etc command interrupted?

Hi guys, have a .11 drive with simple busy/lba problems.
After execute g-lits command rebuild via m0 command, several days has spent without terminal reply.
Now I was wondering what happen if i break this operation?

PS: have fully backed up mods before

Author:  pepe [ October 14th, 2020, 10:16 ]
Post subject:  Re: What technically happen if m0,2,2 etc command interrupte

You don't seem to have any other chance interrupting that operation (it probably hung somewhere already so it's not doing anything at the moment).
btw, m0 does not rebuild glist, I'm afraid you are not really certain about these things, are you?

pepe

Author:  smecca [ October 14th, 2020, 10:45 ]
Post subject:  Re: What technically happen if m0,2,2 etc command interrupte

pepe wrote:
btw, m0 does not rebuild glist, I'm afraid you are not really certain about these things, are you?
pepe


I mean Trasl recalc. is this ok?

Author:  smecca [ October 14th, 2020, 10:47 ]
Post subject:  Re: What technically happen if m0,2,2 etc command interrupte

smecca wrote:
pepe wrote:
btw, m0 does not rebuild glist, I'm afraid you are not really certain about these things, are you?
pepe


I mean Trasl recalc. is this ok?

Author:  pepe [ October 15th, 2020, 3:27 ]
Post subject:  Re: What technically happen if m0,2,2 etc command interrupte

yep, that's better :)

you could turn on 'additional diag messages' to see where it gets stuck.
pepe

Author:  smecca [ October 15th, 2020, 4:25 ]
Post subject:  Re: What technically happen if m0,2,2 etc command interrupte

Thank you Pepe, thats a good idea.
I will stop current operation for tomorrow, whatever it happens, and then I'll analize deeper termnal output.

Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/