HDD GURU FORUMS http://forum.hddguru.com/ |
|
MQ01UBD100 http://forum.hddguru.com/viewtopic.php?f=11&t=41807 |
Page 1 of 1 |
Author: | Lardman [ October 20th, 2021, 10:08 ] |
Post subject: | Re: MQ01UBD100 |
Are you not reading anything in DE ? Try reading using the utility. I don't think the MQ01 are SMR but I'm sure someone will correct me if it is and if that is the case you're really going to need the p-list. |
Author: | sempre [ October 20th, 2021, 10:15 ] |
Post subject: | Re: MQ01UBD100 |
Lardman wrote: Are you not reading anything in DE ? Try reading using the utility. I don't think the MQ01 are SMR but I'm sure someone will correct me if it is and if that is the case you're really going to need the p-list. Thanks reply! It sees data but is very slow and stops reading all the time. |
Author: | Lardman [ October 20th, 2021, 10:34 ] |
Post subject: | Re: MQ01UBD100 |
What's the g-list like? Sometimes slow data is better than no data. If it's tripping into errors reading but picks up after a reset try reading without udma. Slower again but may be more stable. |
Author: | pepe [ October 20th, 2021, 10:49 ] |
Post subject: | Re: MQ01UBD100 |
MQ01 is not SMR. you can probably read by util without plist, albeit with shifts. Wondering if it reads anything useful when it reads slowly... |
Author: | fzabkar [ October 20th, 2021, 14:11 ] |
Post subject: | Re: MQ01UBD100 |
@sempre, can you read the tracks in this model? Can you do a partial read of CP DDh? If you can at least read the important sectors in this CP, I believe I could write a dd script to remove the shifts in the clone. |
Author: | sempre [ October 21st, 2021, 7:19 ] |
Post subject: | Re: MQ01UBD100 |
Thanks All helps! Solved! Closed! |
Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |