Hello HDDguru`s what do u think about this case , now finally i be able to clone now,with many sound at some zones but only with settings like READ by PIO mode and Skipping sectors 50,000 and changing dont use hardware retries, its not DE, but after finshed process , i can get only directories , folders, but whithout data:(
Im try ease, smart and g list and problem stil
Im need u help with toshiba MK8023GAX case, this disk, spin´s but when heads go out from ramp to plater´s do a movement very fast´s from heads not the normal movement from heads after some time and some sound send DRDY DSC but i cant get data begin´s to again movement and sound like " head crash" . platter surface its ok but this is report even, connecting only PCB of course toshiba had the most firmware on PCB, only G LIST and anothers are on SA , i need to recover data on this case.
i do head exchange with same model MK8023GAX HDD2D15 C ZL01 T PHILIPINES and stil making the same problem
Report using HDA and PCB show DRDY DSC after some while
Techno On............................... : Ok Vendor.................................. : Model................................... : Microcode............................... : ------------------------------------------------------------------- NN : Beg Cyl : End Cyl : SPT ------------------------------------------------------------------- 0 : 1660 : 1679 : 1680 1 : -2537 : 821 : 0 2 : -800 : 20 : 0 3 : 5020 : 5039 : 1680 4 : -5897 : 821 : 0 5 : -763 : 20 : 0 6 : 8380 : 8399 : 1680 7 : -9294 : 784 : 0 8 : -763 : 20 : 0 9 : 11740 : 11759 : 1680 10 : -12654 : 784 : 0 11 : -763 : 20 : 0 12 : 15100 : 15119 : 1680 13 : -16037 : 761 : 0 14 : -735 : 20 : 0 15 : 18460 : 18479 : 1680 16 : -19412 : 746 : 0 17 : -707 : 20 : 0 18 : 21820 : 21839 : 1680 19 : -22790 : 728 : 0 20 : -707 : 20 : 0 21 : 25180 : 25199 : 1680 22 : -26169 : 709 : 0 23 : -651 : 20 : 0 24 : 28540 : 28559 : 1680 25 : -29566 : 672 : 0 26 : -651 : 20 : 0 27 : 31900 : 31919 : 1680 28 : -32926 : 672 : 0 29 : -628 : 20 : 0 30 : 35260 : 35279 : 1680 31 : -36324 : 634 : 0 32 : -595 : 20 : 0 33 : 38620 : 38639 : 1680 34 : -39702 : 616 : 0 35 : -576 : 20 : 0 36 : 41980 : 41999 : 1680 37 : -43118 : 560 : 0 Soft reset ... Ok
using only PCB by terminal show`s same
After send DRDY DSC; passport its readed OK, all identification, OK, Famly, model, sectors, no pwd, etc even with sector edit i can see the MBR and partition table, even sector 63, and so, but i cant clone to another with DE show ERR ABRT, and when try to clone do a strange sound from heads like" shhhh" . then shw ERR ABRT with anoher soft its impossible to clone it, wih DE i can see the partition table, MFT, but when select Roor, begin to do the "shhh" sound , and turn off and cant get nothing of data i do a head swap, and problem still. not change the "syntomph".
Some people told me about Move platters to another HDA, but my questions its does i need to exchange on first PCB, of course taking FW ROM, ?
Thanks all u help
|