All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 9 posts ] 
Author Message
 Post subject: Safemode WD Sata
PostPosted: August 22nd, 2007, 2:12 
Offline

Joined: May 21st, 2007, 16:10
Posts: 1532
Location: Gothenburg/ Sweden
Hi guy's,

Is there anyone that knows the right jumper settings to safe mode for a WD1600JD Sata?
The original manual don't say nothing of this.
I've tryed to jumper all 4, but no luck...can't get it into kernel.

Regards

Bosse

_________________
Rescue IT Datarecovery service Sweden
Rescue IT Dataräddning Göteborg AB
http://www.rescue-it.se


Top
 Profile  
 
 Post subject: Re: Safemode WD Sata
PostPosted: August 22nd, 2007, 4:15 
Offline

Joined: May 21st, 2007, 16:10
Posts: 1532
Location: Gothenburg/ Sweden
mr_spokk wrote:
Hi guy's,

Is there anyone that knows the right jumper settings to safe mode for a WD1600JD Sata?
The original manual don't say nothing of this.
I've tryed to jumper all 4, but no luck...can't get it into kernel.

Regards

Bosse



The setting is sorted now ;-)

Bosse

_________________
Rescue IT Datarecovery service Sweden
Rescue IT Dataräddning Göteborg AB
http://www.rescue-it.se


Top
 Profile  
 
 Post subject: Re: Safemode WD Sata
PostPosted: August 28th, 2007, 17:19 
Offline
User avatar

Joined: August 15th, 2006, 3:01
Posts: 2538
Location: CDRLabs @ Chandigarh [ India ]
Hi,
Then share it with the public .

_________________
Regards
Amarbir S Dhillon , Chandigarh Data Recovery Labs
Logical,Semi Physical And Physical Data Recovery
Website-> http://www.chandigarhdatarecovery.com


Top
 Profile  
 
 Post subject: Re: Safemode WD Sata
PostPosted: September 5th, 2007, 6:25 
Offline

Joined: May 21st, 2007, 16:10
Posts: 1532
Location: Gothenburg/ Sweden
Amarbir wrote:
Hi,
Then share it with the public .


Hi Amarbir,
As it turned out that it didn't work for me eventually, might be a bad pcb or wrong instuctions.
So as I didn't know for sure and got a successful reading I did not post the solution.
There is no point to tell a solution if it's wrong...or is it? ;-)

But as far as I know and heard, the pcb should be off, and no jumpers on....
Please let me know if anyone got this to work.

Cheers

Bosse

_________________
Rescue IT Datarecovery service Sweden
Rescue IT Dataräddning Göteborg AB
http://www.rescue-it.se


Top
 Profile  
 
 Post subject: Re: Safemode WD Sata
PostPosted: September 5th, 2007, 11:16 
Offline
User avatar

Joined: June 27th, 2005, 8:27
Posts: 614
Location: India
I think its problem with PCB because i use 4 jumper to get kernel mode.

DF

_________________
DF :)
www.datatracksystem.net


Top
 Profile  
 
 Post subject: Re: Safemode WD Sata
PostPosted: September 7th, 2007, 7:52 
Offline

Joined: May 30th, 2005, 17:07
Posts: 461
darkforce1 wrote:
I think its problem with PCB because i use 4 jumper to get kernel mode...


Hi,
:arrow: darkforce1
If drive is WDC Caviar Cyl32 SATA U can not use 4 jumper to get kernel mode...

Mikippp


Top
 Profile  
 
 Post subject: Re: Safemode WD Sata
PostPosted: September 8th, 2007, 14:39 
Offline
User avatar

Joined: June 27th, 2005, 8:27
Posts: 614
Location: India
Thank you Mikippp

for updating me. I have always worked with Marvel so not knowing SM for cavier

Thank you once again

DF :)

_________________
DF :)
www.datatracksystem.net


Top
 Profile  
 
 Post subject: Re: Safemode WD Sata
PostPosted: September 10th, 2007, 3:36 
Offline

Joined: May 30th, 2005, 17:07
Posts: 461
Hi,
Little rectification...
My previous statement was not precise...
If drive is *WDC Caviar Cyl32 SATA U can use 4 jumper to get PSV Mode..., but **PC-3000 PCI / PC-3000 UDMA not work with such drive in kernel mode...
* Tested on WD1600JD-40GBB2 (Polaris)
** PC-3000 PCI (2.27) / PC-3000 UDMA (3.01)


Mikippp


Top
 Profile  
 
 Post subject: Re: Safemode WD Sata
PostPosted: September 13th, 2007, 0:07 
Offline
User avatar

Joined: June 27th, 2005, 8:27
Posts: 614
Location: India
Hi Mikippp
Again thank you for correction
DF

_________________
DF :)
www.datatracksystem.net


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 9 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 4 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group