Hello friends.
I have a SAMSUNG drive that is comming to 'ready' state, but is being detected incorrectly
Model: A S N P2014 Serial: 088 1 Y 04120 Firmware: C100-33 Capacity: 186.3GB (390 705 584)
Service Area Head map................................ : Module header error Part Number............................. : q2s1J1FYA2v1r9 USER password........................... : No Module header of BISPT.................. : Module header error
Heads test Selected heads.......................... : 0,1,2,3 Head : 0................................ : OK Head : 1................................ : OK Head : 2................................ : OK Head : 3................................ : OK Test completed
Burn test report creation Reading module BRSLT.................... : Ok Reading module BISPT.................... : Module header error Reading module ELOG..................... : Ok Test completed
SA Structure reports no errors, but at the end I am getting: Password information.................... : Loaded S-LIST.................................. : Module header error T-LIST.................................. : Module header error A-LIST.................................. : Module header error D-LIST.................................. : Module header error
I saved all modules with no errors. Logical test is running, returns no errors. Physical test fails (stopping right after I start it):
Physical test: Reading *********************************************************** Initial cylinder........................ : 64 Final cylinder.......................... : 108591 Heads for reading....................... : 0,1,2,3 *********************************************************** Last read sector........................ : (C:0/H:0/S:0) Test completed Module header error
Will hot-swap let me access the data? Is there any way to repar this drive?
Thanks in advance for any help, Regards, Pawel
|