Main » Forums home » Research and development

All times are UTC - 5 hours [ DST ]

Forum rules


Please do not post questions about data recovery cases here (use this forum instead). This forum is for topics on finding new ways to recover data. Accessing firmware, writing programs, reading bits off the platter, recovering data from dust...



Post new topic Reply to topic  Page 1 of 1
  [ 7 posts ] 
  Previous topic | Next topic 
Author Message
GTXsteven
 Post subject: WD 800JB detection model wrong question
PostPosted: October 24th, 2008, 3:36 
Offline

Joined: October 24th, 2008, 1:41
Posts: 3
1. ask that I have a WD 800JB hard disk to detect hard disk model WDCROMMODEL in BIOS--SABRE--05.01C05-ROMSN#XYZ ask that has the human to be able to solve?? Moreover the hard disk has knocks the plate sound

2. some people to be able to provide revises ROM the parameter??
Top
 Profile  
 
pcimage
 Post subject: Re: WD 800JB detection model wrong question
PostPosted: October 24th, 2008, 3:40 
Offline

Joined: November 29th, 2006, 10:08
Posts: 7843
Location: UK
Not ROM problem.

Heads or PCB, or firmware.

What sort of knocking? (Continuous, or knock and spin down)

_________________
PC Image Data Recovery
http://www.pcimage.co.uk

New!! HDD-PCB.COM for all your PCB and donor HDD requirements!
Top
 Profile  
 
GTXsteven
 Post subject: Re: WD 800JB detection model wrong question
PostPosted: October 24th, 2008, 4:05 
Offline

Joined: October 24th, 2008, 1:41
Posts: 3
pcimage wrote:
Not ROM problem.

Heads or PCB, or firmware.

What sort of knocking? (Continuous, or knock and spin down)


--------------------------------
Gets down knocks 2-3 then motor to stop revolving ~ to enter PC3000 to have 02 modules to have the question I to have writes ROM with ATA but inextricability ~
Top
 Profile  
 
harddrivespecialist
 Post subject: Re: WD 800JB detection model wrong question
PostPosted: October 24th, 2008, 10:47 
Offline

Joined: January 15th, 2008, 11:06
Posts: 1418
Location: Providence, RI. Boston, MA USA
You need a help of professional here.
This is a big problem.

_________________
www.datarecoveryne.com
Top
 Profile  
 
pcimage
 Post subject: Re: WD 800JB detection model wrong question
PostPosted: October 24th, 2008, 13:56 
Offline

Joined: November 29th, 2006, 10:08
Posts: 7843
Location: UK
Bad heads, almost for sure.

Pro help required.

_________________
PC Image Data Recovery
http://www.pcimage.co.uk

New!! HDD-PCB.COM for all your PCB and donor HDD requirements!
Top
 Profile  
 
drc
 Post subject: Re: WD 800JB detection model wrong question
PostPosted: October 25th, 2008, 15:09 
Offline

Joined: August 12th, 2008, 13:11
Posts: 3235
Location: USA
I'd think there is a reasonable chance that it is just a PCB failure. Of course it will require ROM transfer etc etc.

_________________
You don't have to backup all of your files, just the ones you want to keep.
Top
 Profile  
 
GTXsteven
 Post subject: Re: WD 800JB detection model wrong question
PostPosted: October 27th, 2008, 11:16 
Offline

Joined: October 24th, 2008, 1:41
Posts: 3
drccsc wrote:
I'd think there is a reasonable chance that it is just a PCB failure. Of course it will require ROM transfer etc etc.



Will thank you warm-hearted instruction ~ I to try to look at ~~ again
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 7 posts ] 

Main » Forums home » Research and development

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 43 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Switch to mobile style
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group