Main » Forums home » Research and development

All times are UTC - 5 hours [ DST ]

Forum rules


Please do not post questions about data recovery cases here (use this forum instead). This forum is for topics on finding new ways to recover data. Accessing firmware, writing programs, reading bits off the platter, recovering data from dust...



Post new topic Reply to topic  Page 1 of 1
  [ 12 posts ] 
  Previous topic | Next topic 
Author Message
deepturn42
 Post subject: solutions for motor blocked
PostPosted: February 21st, 2011, 9:34 
Offline

Joined: February 21st, 2011, 9:27
Posts: 3
Location: FRANCE
I have a 1T barracuda that the motor blocked.
I think to know the solutions.
Hello , Anyone has already tested hddsync ??

greating
Top
 Profile  
 
craig6928
 Post subject: Re: solutions for motor blocked
PostPosted: February 23rd, 2011, 1:18 
Offline

Joined: February 15th, 2006, 3:38
Posts: 1079
Location: canada
that the type of tool you would need to getting the motor unsticking

possible might work


a lot of members have made there own tools for getting hard drive motors unstuck and free

try the company below if you need a tool like this asap


http://www.hdrconline.com/spindle_unstuck.php

or the other option if you got the right tools do a platter swap
to a known good hard drive donor


good luck
Top
 Profile  
 
deepturn42
 Post subject: Re: solutions for motor blocked
PostPosted: February 23rd, 2011, 3:54 
Offline

Joined: February 21st, 2011, 9:27
Posts: 3
Location: FRANCE
I know the product HDRC but it is very difficult to use and not practical.
It will not repair and it goes wrong.
hddsync I think is much better,with this tool you change the engine without losing synchronization
I look for people who know
The demo is interresting
http://www.youtube.com/watch?v=V2MkThaAYdk
Top
 Profile  
 
BlackST
 Post subject: Re: solutions for motor blocked
PostPosted: February 23rd, 2011, 5:29 
Offline

Joined: July 18th, 2006, 3:05
Posts: 7474
Location: ITALY
Is it a promo of hddsync or whatelse ? :lol:

In any case there is seizure and seizure....
Top
 Profile  
 
deepturn42
 Post subject: Re: solutions for motor blocked
PostPosted: February 23rd, 2011, 6:40 
Offline

Joined: February 21st, 2011, 9:27
Posts: 3
Location: FRANCE
it is an observation
Top
 Profile  
 
craig6928
 Post subject: Re: solutions for motor blocked
PostPosted: February 23rd, 2011, 20:14 
Offline

Joined: February 15th, 2006, 3:38
Posts: 1079
Location: canada
good tool for sure but a little bit expensive on the side

other then that looks good
Top
 Profile  
 
TerraNova
 Post subject: Re: solutions for motor blocked
PostPosted: February 24th, 2011, 1:38 
Offline

Joined: August 8th, 2007, 6:32
Posts: 1238
Location: inside ROM
99.9% wont work
Top
 Profile  
 
tckin
 Post subject: Re: solutions for motor blocked
PostPosted: February 24th, 2011, 6:02 
Offline

Joined: February 4th, 2010, 12:39
Posts: 13
Location: UK
99.999999999% won't work

_________________
DR Research Engineer
Top
 Profile  
 
arvika
 Post subject: Re: solutions for motor blocked
PostPosted: February 24th, 2011, 18:20 
Offline

Joined: October 24th, 2009, 15:22
Posts: 875
Location: Poland
SERT.

_________________
Flash Killer - everyday new resources (pinout, XOR, ECC,config) for flash devices
Top
 Profile  
 
helpdisc
 Post subject: Re: solutions for motor blocked
PostPosted: February 28th, 2011, 8:20 
Offline
User avatar

Joined: December 12th, 2005, 3:32
Posts: 705
Location: Belgrade
http://www.hddsurgery.com/forum/viewtop ... 44c0e9a305
it does not work yet...

_________________
HddSurgery - Professional Data Recovery Tools
Top
 Profile  
 
helpdisc
 Post subject: Re: solutions for motor blocked
PostPosted: March 13th, 2011, 9:15 
Offline
User avatar

Joined: December 12th, 2005, 3:32
Posts: 705
Location: Belgrade
we made it, just few more days of work!

_________________
HddSurgery - Professional Data Recovery Tools
Top
 Profile  
 
ccamargol
 Post subject: Re: solutions for motor blocked
PostPosted: December 2nd, 2011, 16:28 
Offline

Joined: February 17th, 2009, 13:01
Posts: 111
Location: Bogotá, D.C.
craig6928 wrote:
that the type of tool you would need to getting the motor unsticking

possible might work


a lot of members have made there own tools for getting hard drive motors unstuck and free

try the company below if you need a tool like this asap


http://www.hdrconline.com/spindle_unstuck.php

or the other option if you got the right tools do a platter swap
to a known good hard drive donor


good luck


I have a HRC tools...very bad!!
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 12 posts ] 

Main » Forums home » Research and development

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 32 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Switch to mobile style
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group