In-depth technology research: finding new ways to recover data, accessing firmware, writing programs, reading bits off the platter, recovering data from dust.
Please do not post
questions about data recovery cases here (use this forum
instead). This forum is for topics on finding new ways to recover data. Accessing firmware, writing programs, reading bits off the platter, recovering data from dust...
April 12th, 2011, 7:54
My old laptop died a few days ago and I was wondering if I can use its hard drive as a external hard disk.
Its a Travelstar DJSA-220 20GB HD, i wanted to know if there is any converter or something else that i can use to connect the driver externally to my desktop pc using a usb.
I have also attached some picture's of the hard disk that i have!
I hope you guys can help me out!
April 12th, 2011, 8:37
At first take out the adapter connected (now - visible on the photo) onto the ide hdd.
You then have a standard 44pin 2,5" ide hdd - and there are noumerous USB2.0
adapters or cases - for low budget - available out there on the market.
Try to get one with its own power supply - or if its not available, use a usb hub
with a power supply - older 2,5" hdd need more power to spin up than some
usb 2.0 ports supply.
April 12th, 2011, 10:32
ok so what you are saying is that there is a adapter connected onto to hard disk and that taking it off will turn it into a standard IDE hd rite?
April 12th, 2011, 10:57
Have a close look to the pins of the hdd as it is now.
One easily can see that these pins belong to a little adapter which
is connected on top of the ide contacts of the hdd itself.
Again, have a close look to your hdd - one can see it on the photo:
On the right side of the rear one can see the 4 pins which are not
covered by the adapter ....
Take this adapter carefully off from the hdd pins.
After doing that, you have a standard 2,5" IDE hdd
The little adapter is only to connect it to the notebook and does
not belong to the hdd.
April 12th, 2011, 11:10
I got now only thing left is to buy an adapter!
Thank you soooo much for your help!
Powered by phpBB © phpBB Group.