Switch to full style
In-depth technology research: finding new ways to recover data, accessing firmware, writing programs, reading bits off the platter, recovering data from dust.

Forum rules

Please do not post questions about data recovery cases here (use this forum instead). This forum is for topics on finding new ways to recover data. Accessing firmware, writing programs, reading bits off the platter, recovering data from dust...
Post a reply

STM31000528AS Clicking Noise

March 9th, 2013, 10:59

i don't know whats happen my hard working well but after restart make click noise and not detect STM31000528AS

100% new hard

Re: STM31000528AS Clicking Noise

March 9th, 2013, 13:43

i want to repair this and i dont want data

and i have dku-5 cable for hyperterminal repairing

Re: STM31000528AS Clicking Noise

March 22nd, 2013, 15:50

OK Fine :

Rst 0x20M
Servo Processor Is Reset.
RW: Disc Ctlr Initialization Completed.

ExecuteSpinRequest
[Clicking]
ASCII Diag mode

F3 T>/2

F3 2>Z

No HOST FIS-ReadyStatusFlags 2002B001
DiagError 00005014
F3 2>U

DiagError 00005014
F3 2>/

F3 T>F,,22
[Clicking]
ExecuteSpinRequest

HighPowerMode
Failed to load overlay 00000004
LED:000000CC FAddr:00289705
LED:000000CC FAddr:00289705
LED:000000CC FAddr:00289705
LED:000000CC FAddr:00289705
LED:000000CC FAddr:00289705
LED:000000CC FAddr:00289705
LED:000000CC FAddr:00289705
LED:000000CC FAddr:00289705
...

Re: STM31000528AS Clicking Noise

March 22nd, 2013, 15:54

Again (With Plastic Under Motor Power) :

Rst 0x20M
Servo Processor Is Reset.
RW: Disc Ctlr Initialization Completed.

ExecuteSpinRequest

ASCII Diag mode

F3 T>/2

F3 2>
No HOST FIS-ReadyStatusFlags 2002B001

F3 2>Z

HighPowerMode
Spin Down Complete
Elapsed Time 0.084 msecs
F3 2>U

HighPowerMode
ExecuteSpinRequest
[Clicking]
DiagError 00006008
Spin Error
Elapsed Time 22.640 secs
R/W Status 2 R/W Error 84150180
F3 2>/

F3 T>F,,22

Failed to load overlay 00000004
LED:000000CC FAddr:00289705
LED:000000CC FAddr:00289705
LED:000000CC FAddr:00289705
LED:000000CC FAddr:00289705
LED:000000CC FAddr:00289705
LED:000000CC FAddr:00289705
LED:000000CC FAddr:00289705
LED:000000CC FAddr:00289705
...

Re: STM31000528AS Clicking Noise

March 28th, 2013, 8:04

erfanoabdi wrote:OK Fine :

Rst 0x20M
Servo Processor Is Reset.
RW: Disc Ctlr Initialization Completed.

ExecuteSpinRequest
[Clicking]
ASCII Diag mode

F3 T>/2

F3 2>Z

No HOST FIS-ReadyStatusFlags 2002B001
DiagError 00005014
F3 2>U

DiagError 00005014
F3 2>/

F3 T>F,,22
[Clicking]
ExecuteSpinRequest

HighPowerMode
Failed to load overlay 00000004
LED:000000CC FAddr:00289705
LED:000000CC FAddr:00289705
LED:000000CC FAddr:00289705
LED:000000CC FAddr:00289705
LED:000000CC FAddr:00289705
LED:000000CC FAddr:00289705
LED:000000CC FAddr:00289705
LED:000000CC FAddr:00289705
...


Hi Dear Friend erfanoabdi

This Is Not Normal Common Problem If The Data Is Need Then Dont Do Anything Urself Tell Here Where R U From Full Location So If Some We Can Give Good Suggetion.
I Have Solution But Its Not Easy DIY.
Sorry For My Bad English.

Yours Friend
Jignesh Pankhania (India/Gujarat/Ahmedabad)

Re: STM31000528AS Clicking Noise

March 28th, 2013, 8:47

Joined: March 9th, 2013, 10:52
Posts: 4
Location: tehran

Re: STM31000528AS Clicking Noise

April 23rd, 2013, 0:27

its been a month he didnt reply..guess where could he have been ? :lol:

Re: STM31000528AS Clicking Noise

October 6th, 2017, 20:25

erfanoabdi wrote:OK Fine :

Rst 0x20M
Servo Processor Is Reset.
RW: Disc Ctlr Initialization Completed.

ExecuteSpinRequest
[Clicking]
ASCII Diag mode

F3 T>/2

F3 2>Z

No HOST FIS-ReadyStatusFlags 2002B001
DiagError 00005014
F3 2>U

DiagError 00005014
F3 2>/

F3 T>F,,22
[Clicking]
ExecuteSpinRequest

HighPowerMode
Failed to load overlay 00000004
LED:000000CC FAddr:00289705
LED:000000CC FAddr:00289705
LED:000000CC FAddr:00289705
LED:000000CC FAddr:00289705
LED:000000CC FAddr:00289705
LED:000000CC FAddr:00289705
LED:000000CC FAddr:00289705
LED:000000CC FAddr:00289705
...


head is gone and damaged
you can only use pcb as donor

Re: STM31000528AS Clicking Noise

October 7th, 2017, 16:42

yes sometime people just post in passion and dont realize how old is the post ...

Re: STM31000528AS Clicking Noise

November 30th, 2017, 19:31

i just wonder how the hack they find these stone-age topics...
Post a reply