In-depth technology research: finding new ways to recover data, accessing firmware, writing programs, reading bits off the platter, recovering data from dust.
Please do not post
questions about data recovery cases here (use this forum
instead). This forum is for topics on finding new ways to recover data. Accessing firmware, writing programs, reading bits off the platter, recovering data from dust...
April 24th, 2015, 4:10
I use combs from quite long time. This one has nice design and works good. Very important is reasonable price
June 16th, 2015, 10:29
We have some 4 and 8 head sets and they work well. They are anti-static and the quality of the material is good. Definitely a good arsenal to have in your toolkit! The shorting tool is also nice, granted one can work without it, tweezers always end up getting bent around here. The shorting tool is pretty idiot's proof, so also nice for beginners.
April 4th, 2016, 8:14
Dobre Sir ,
Today Ordered The Short Tool
.Waiting For It To Arrive in The Next 2 To 4 Weeks .Hope it Reaches fine In This Piss Poor Place .A Must Have Now a Days With So Many Seagates Here And There .
April 4th, 2016, 8:54
Its on its way Amarbir.
I hope it arrives fine !
April 4th, 2016, 12:11
dobrevjetser wrote:Its on its way Amarbir.
I hope it arrives fine !
Do You Work 24 Hours a Day ,Woooo The email Responses Were quick superquick Infact .The Acelab Terminal Cover Should Be a Complete Cover Just Lights And The Cable Connection Hole Should Be There Not The Way You Have Designed It .I Wanted To Tryout Your Head Tools But i Want To Buy Ertools Complete Lineup ,Could Not Arrange Money Last Time So Now Before i Ask Him again I Will First Arrange Money .Sometimes The Head Unstuck Tools Become Necessary Why Because God Has Given Us 2 Hands ,Take an Example of This Job i did -> https://www.facebook.com/chandigarhdata ... 7102251860
.In This Case The Heads Would Not Go On the Plastic Ramp ,I Had To Remove The Plastic Ramp ,Head Was Still Stuck On Platter So i Had To Rotate The Platter Using a T6 Screwdriver From My Left Hand and Then Drag The Head Out From The Platter From Right Hand ,If i Had a Third Hand i Could Have Used Your Head Tool Kept It close To The Platter And Catch The Head While It Came Out Of Platter In Force .Hence Ertools Head unstuck Tool For This Samsing M8E Family Is Great,With the Kind Of Experience You Have I am Sure You Can Also Make these Tools With Precision
April 4th, 2016, 12:24
We continue to develop new tools. We'll take a look at what you request. We are always open for suggestions.
Powered by phpBB © phpBB Group.