Main » Forums home » Research and development

All times are UTC - 5 hours [ DST ]

Forum rules


Please do not post questions about data recovery cases here (use this forum instead). This forum is for topics on finding new ways to recover data. Accessing firmware, writing programs, reading bits off the platter, recovering data from dust...



Post new topic Reply to topic  Page 1 of 2
  [ 35 posts ]  Go to page 1, 2  Next
  Previous topic | Next topic 
Author Message
Comos
 Post subject: WD EasyStore 16TB USB bridge FW Wanted
PostPosted: January 28th, 2024, 9:19 
Offline

Joined: January 22nd, 2021, 11:42
Posts: 17
Location: Czech Republic
Hello,

does somebody have the related dump or the drive that is willing to make a dump please?
I checked Ebay, but there are just complete drives available, not just the enlousure with the USB board.14TB are available though.
In the past I got the 14TB EasyStore enclousure with USB board and managed to get it run with the WD140EFFX (14TB Red Plus) and via WD Formatter to format it in XP compatability, Im able to use the full MFT partition size of 14TB.Recently I got the WD16KRYZ (16TB Gold) to try to get the max supported MFT partition and tried with my spare USB board with 14TB Easystore FW, but the WD Formatter can't even detect the drive, so would like to test the 16TB FW if any luck.Did somebody look closer at the USB board FW? I can provide images from 14TB EasyStore and WD 14TB My Book if interested.
Top
 Profile  
 
einstein9
 Post subject: Re: WD EasyStore 16TB USB bridge FW Wanted
PostPosted: January 30th, 2024, 2:45 
Offline
User avatar

Joined: May 13th, 2010, 11:17
Posts: 2798
Location: Kuwait
send the photo of the required usb board

_________________
Kuwait Data Recovery - UNIX GTC
The only reason for time is so that everything doesn't happen at once. By: Albert Einstein
Top
 Profile  
 
Comos
 Post subject: Re: WD EasyStore 16TB USB bridge FW Wanted
PostPosted: January 31st, 2024, 7:35 
Offline

Joined: January 22nd, 2021, 11:42
Posts: 17
Location: Czech Republic
einstein9 wrote:
send the photo of the required usb board


The board is actually same like in most of the 3.5" WD enclousures like EasyStore, My Book, Desktop Elements only with different onboard FW.


Attachments:
ASM1151W.jpg
ASM1151W.jpg [ 201.69 KiB | Viewed 25207 times ]
Top
 Profile  
 
einstein9
 Post subject: Re: WD EasyStore 16TB USB bridge FW Wanted
PostPosted: January 31st, 2024, 8:17 
Offline
User avatar

Joined: May 13th, 2010, 11:17
Posts: 2798
Location: Kuwait
It should work, hdd size doesn`t matter ( i thought new)

ur problem is mostly the drive itself, seek pro. help better before you attempt to do anything
with the 14tb drive few people sadly

_________________
Kuwait Data Recovery - UNIX GTC
The only reason for time is so that everything doesn't happen at once. By: Albert Einstein
Top
 Profile  
 
Comos
 Post subject: Re: WD EasyStore 16TB USB bridge FW Wanted
PostPosted: January 31st, 2024, 9:52 
Offline

Joined: January 22nd, 2021, 11:42
Posts: 17
Location: Czech Republic
einstein9 wrote:
It should work, hdd size doesn`t matter ( i thought new)

ur problem is mostly the drive itself, seek pro. help better before you attempt to do anything
with the 14tb drive few people sadly


again for explanation, the 14TB WD Red works with this USB bridge , that I got from a 14TB EasyStore.
The problem is with a WD 16TB Gold and this USB bridge from a 14TB EasyStore.
Top
 Profile  
 
einstein9
 Post subject: Re: WD EasyStore 16TB USB bridge FW Wanted
PostPosted: February 1st, 2024, 2:26 
Offline
User avatar

Joined: May 13th, 2010, 11:17
Posts: 2798
Location: Kuwait
check the adapter chip should match INIC-xxxx (regardless of the hdd size)

"WD Formatter can't even detect the drive" connect ur drive alone and access 1st. sector if reads fine if not seek help better

_________________
Kuwait Data Recovery - UNIX GTC
The only reason for time is so that everything doesn't happen at once. By: Albert Einstein
Top
 Profile  
 
fzabkar
 Post subject: Re: WD EasyStore 16TB USB bridge FW Wanted
PostPosted: February 1st, 2024, 3:52 
Offline
User avatar

Joined: September 8th, 2009, 18:21
Posts: 15525
Location: Australia
einstein9 wrote:
check the adapter chip should match INIC-xxxx (regardless of the hdd size)

"WD Formatter can't even detect the drive" connect ur drive alone and access 1st. sector if reads fine if not seek help better

The OP does not have a problem with the new 16TB drive. @Comos just wants to use the new drive with the bridge PCB that came with an older 14TB drive.

_________________
A backup a day keeps DR away.
Top
 Profile  
 
einstein9
 Post subject: Re: WD EasyStore 16TB USB bridge FW Wanted
PostPosted: February 1st, 2024, 10:51 
Offline
User avatar

Joined: May 13th, 2010, 11:17
Posts: 2798
Location: Kuwait
@ fzabkar

it should work regardless of the size, only data will be enc. using the format will make new partition
unless the drive have problems or weak heads

_________________
Kuwait Data Recovery - UNIX GTC
The only reason for time is so that everything doesn't happen at once. By: Albert Einstein
Top
 Profile  
 
fzabkar
 Post subject: Re: WD EasyStore 16TB USB bridge FW Wanted
PostPosted: February 1st, 2024, 12:47 
Offline
User avatar

Joined: September 8th, 2009, 18:21
Posts: 15525
Location: Australia
@Comos, could you upload your 14TB bridge firmware dump? I suspect that there is a small area that stores the ID of your drive. I seem to recall a thread where @michael_chiklis used a foreign drive with a particular bridge and caused its firmware to be rewritten with the ID of the foreign drive.

_________________
A backup a day keeps DR away.
Top
 Profile  
 
Comos
 Post subject: Re: WD EasyStore 16TB USB bridge FW Wanted
PostPosted: February 1st, 2024, 16:23 
Offline

Joined: January 22nd, 2021, 11:42
Posts: 17
Location: Czech Republic
einstein9 wrote:
@ fzabkar

it should work regardless of the size, only data will be enc. using the format will make new partition
unless the drive have problems or weak heads


It's a brand new hdd, normally works ,can be partitioned,formatted.
Top
 Profile  
 
Comos
 Post subject: Re: WD EasyStore 16TB USB bridge FW Wanted
PostPosted: February 1st, 2024, 16:41 
Offline

Joined: January 22nd, 2021, 11:42
Posts: 17
Location: Czech Republic
fzabkar wrote:
@Comos, could you upload your 14TB bridge firmware dump? I suspect that there is a small area that stores the ID of your drive. I seem to recall a thread where @michael_chiklis used a foreign drive with a particular bridge and caused its firmware to be rewritten with the ID of the foreign drive.


Sure, thiis is a complete dump that I made from the physical chip via a programmer.It's from my spare 14TB EasyStore USB board that I got.
I have not compared it with the actual one which I run with the 14TB WD Red, where I was suprosed that it worked from scratch with different WD drive that was in the enclousure, so that ID thing sounds a bit strange. Couldn't be based on the LBA size?
Top
 Profile  
 
fzabkar
 Post subject: Re: WD EasyStore 16TB USB bridge FW Wanted
PostPosted: February 1st, 2024, 16:50 
Offline
User avatar

Joined: September 8th, 2009, 18:21
Posts: 15525
Location: Australia
Comos wrote:
Sure, this is a complete dump that I made from the physical chip via a programmer.

Sorry, I don't see it.

_________________
A backup a day keeps DR away.
Top
 Profile  
 
Comos
 Post subject: Re: WD EasyStore 16TB USB bridge FW Wanted
PostPosted: February 1st, 2024, 17:45 
Offline

Joined: January 22nd, 2021, 11:42
Posts: 17
Location: Czech Republic
fzabkar wrote:
Comos wrote:
Sure, this is a complete dump that I made from the physical chip via a programmer.

Sorry, I don't see it.


ah, .bin didn't get through, had to zip it.


Attachments:
WD_Easystore_14TB.zip [74.36 KiB]
Downloaded 60 times
Top
 Profile  
 
fzabkar
 Post subject: Re: WD EasyStore 16TB USB bridge FW Wanted
PostPosted: February 1st, 2024, 18:27 
Offline
User avatar

Joined: September 8th, 2009, 18:21
Posts: 15525
Location: Australia
Can you dump the firmware on your working unit and compare the two dumps in a hex editor?

See https://forum.hddguru.com/viewtopic.php?f=1&t=44056

You might like to try that procedure with your spare board first, to make sure that it works.

_________________
A backup a day keeps DR away.
Top
 Profile  
 
Comos
 Post subject: Re: WD EasyStore 16TB USB bridge FW Wanted
PostPosted: February 1st, 2024, 18:46 
Offline

Joined: January 22nd, 2021, 11:42
Posts: 17
Location: Czech Republic
yes, or try to dump it with this:

https://github.com/smx-smx/ASMTool

If somebody has the toolchain ready, might be good if he can build a x32/x64 binary, I have to setup mine 1st.
Top
 Profile  
 
fzabkar
 Post subject: Re: WD EasyStore 16TB USB bridge FW Wanted
PostPosted: February 1st, 2024, 19:15 
Offline
User avatar

Joined: September 8th, 2009, 18:21
Posts: 15525
Location: Australia
Code:
Offset(h) 00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F

0001F080  79 F9 4B 4B 10 58 25 DE 01 00 00 00 4B 50 00 CC  ..KK........KP..
                      ^^^^^ +++++                ^^^^^^^^
                      VID    PID                  WWN

0001F090  A2 A3 E8 A3 0F 01 50 00 CC A2 A3 E8 A3 0F 01 50  ................
          ^^^^^^^^^^^^^^^^^ -------------------------- **
0001F0A0  00 CC A2 A3 E8 A3 0F 01 50 00 CC A2 A3 E8 A3 0F  ................
          *********************** =======================
0001F0B0  01 50 00 CC A2 A3 E8 A3 0F 01 00 00 01 00 00 00  ................
          ==
0001F0C0  10 58 26 4D 57 44 20 20 20 20 20 20 65 61 73 79  .X&MWD      easy
          ^^^^^ +++++
          VID    PID

0001F0D0  73 74 6F 72 65 20 32 36 34 44 20 20 04 03 09 04  store 264D  ....
0001F0E0  20 03 57 00 65 00 73 00 74 00 65 00 72 00 6E 00   .W.e.s.t.e.r.n.
0001F0F0  20 00 44 00 69 00 67 00 69 00 74 00 61 00 6C 00   .D.i.g.i.t.a.l.
0001F100  00 00 00 00 00 00 00 00 00 00 1E 03 65 00 61 00  ............e.a.
0001F110  73 00 79 00 73 00 74 00 6F 00 72 00 65 00 20 00  s.y.s.t.o.r.e. .
0001F120  32 00 36 00 34 00 44 00 00 00 00 00 00 00 00 00  2.6.4.D.........
0001F130  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
0001F140  BB 1D 4B 4B 00 00 00 00 00 00 00 00 00 00 00 00  ..KK............

There are 4 instances of the WWN - 5000CCA2A3E8A30F01. Is this the same number as is on the label?

There are two USB VID/PID pairs, 0x1058 / 0x25DE and 0x1058 / 0x264D.

0x1058 is WD's USB Vendor ID.


Code:
Offset(h) 00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F

0000F080  45 60 4B 4B 51 42 4A 57 44 38 34 54 20 20 20 20  .KKQBJWD84T   
                      ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
0000F090  20 20 20 20 20 20 20 20 00 00 00 06 5D E0 00 00          ........
          ^^^^^^^^^^^^^^^^^^^^^^^
0000F0A0  15 18 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
0000F0B0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
0000F0C0  FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF  ................
0000F0D0  FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF  ................
0000F0E0  FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF  ................
0000F0F0  FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF  ................
0000F100  FF E8 4B 4B 00 00 02 00 00 00 00 06 5D E0 00 00  ..KK............
0000F110  01 01 01 01 01 00 00 00 00 FF 00 00 00 00 00 00  ................

Serial number = QBJWD84T + 12 spaces

_________________
A backup a day keeps DR away.
Top
 Profile  
 
fzabkar
 Post subject: Re: WD EasyStore 16TB USB bridge FW Wanted
PostPosted: February 1st, 2024, 19:36 
Offline
User avatar

Joined: September 8th, 2009, 18:21
Posts: 15525
Location: Australia
Code:
Offset(h) 00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F

0000F080  45 60 4B 4B 51 42 4A 57 44 38 34 54 20 20 20 20  .KKQBJWD84T   
0000F090  20 20 20 20 20 20 20 20 00 00 00 06 5D E0 00 00          ........
                                           ^^^^^^^^^^^^^^
0000F0A0  15 18 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
          +++++
          0x1518 = 5400 (RPM?)

0000F0B0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
0000F0C0  FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF  ................
0000F0D0  FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF  ................
0000F0E0  FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF  ................
0000F0F0  FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF  ................
0000F100  FF E8 4B 4B 00 00 02 00 00 00 00 06 5D E0 00 00  ..KK............
                                           ^^^^^^^^^^^^^^
                    capacity of USB mass storage device??

0000F110  01 01 01 01 01 00 00 00 00 FF 00 00 00 00 00 00  ................

Full capacity of 14TB HDD is 27349077168 (= 0x65E21CCB0) sectors.

A capacity of 0x065DE00000 sectors differs from the full capacity by 4312240 sectors (= 2.2GB). Does this mean that the USB bridge firmware is reserving the last 2.2GB for its own use?

_________________
A backup a day keeps DR away.
Top
 Profile  
 
fzabkar
 Post subject: Re: WD EasyStore 16TB USB bridge FW Wanted
PostPosted: February 1st, 2024, 20:06 
Offline
User avatar

Joined: September 8th, 2009, 18:21
Posts: 15525
Location: Australia
I should have written that there are 5 instances of the WWN.

Code:
Offset(h) 00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F

0001F080  79 F9 4B 4B 10 58 25 DE 01 00 00 00 4B 50 00 CC  ..KK........KP..
                      ^^^^^ +++++                ^^^^^^^^
                      VID    PID                  WWN

0001F090  A2 A3 E8 A3 0F 01 50 00 CC A2 A3 E8 A3 0F 01 50  ................
          ^^^^^^^^^^^^^^^^^ -------------------------- **
0001F0A0  00 CC A2 A3 E8 A3 0F 01 50 00 CC A2 A3 E8 A3 0F  ................
          *********************** =======================
0001F0B0  01 50 00 CC A2 A3 E8 A3 0F 01 00 00 01 00 00 00  ................
          == ++++++++++++++++++++++++++

Also I'm wondering if the following is reporting the physical sector size, 0x200 (= 512) bytes.

Code:
Offset(h) 00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F

0000F100  FF E8 4B 4B 00 00 02 00 00 00 00 06 5D E0 00 00  ..KK............
                      ^^^^^^^^^^^

_________________
A backup a day keeps DR away.
Top
 Profile  
 
fzabkar
 Post subject: Re: WD EasyStore 16TB USB bridge FW Wanted
PostPosted: February 1st, 2024, 20:19 
Offline
User avatar

Joined: September 8th, 2009, 18:21
Posts: 15525
Location: Australia
I would take your working unit and use WD's formatter to change the physical sector size. Dump the bridge firmware before and after, then compare the dumps. I suspect that the dumps will differ at the abovementioned dword, plus I suspect that the first two bytes of the data block could be a 16-bit checksum or CRC.

_________________
A backup a day keeps DR away.
Top
 Profile  
 
Comos
 Post subject: Re: WD EasyStore 16TB USB bridge FW Wanted
PostPosted: February 2nd, 2024, 3:36 
Offline

Joined: January 22nd, 2021, 11:42
Posts: 17
Location: Czech Republic
fzabkar wrote:
I would take your working unit and use WD's formatter to change the physical sector size. Dump the bridge firmware before and after, then compare the dumps. I suspect that the dumps will differ at the abovementioned dword, plus I suspect that the first two bytes of the data block could be a 16-bit checksum or CRC.


You can't change the physical sector size in WD formatter, it just's allow XP compatability, which in reality is 4K sectored on the physical drive, but to the system it reports 512, so 4K sectors must be aligned (not sure if WD formatter performs that).One key it might be reported speed, the 14TB WD Red Plus is reported as 5400rpm (sw slowed down probably), buit the 16TB WD Gold is 7200.
The rest of the point I'll try to verify on the working unit.
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 2
  [ 35 posts ]  Go to page 1, 2  Next

Main » Forums home » Research and development

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 9 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Switch to mobile style
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group