All times are UTC - 5 hours [ DST ]


Forum rules


Please do not post questions about data recovery cases here (use this forum instead). This forum is for topics on finding new ways to recover data. Accessing firmware, writing programs, reading bits off the platter, recovering data from dust...



Post new topic Reply to topic  [ 1 post ] 
Author Message
 Post subject: How to find TRST & SRST for JTAG?
PostPosted: July 20th, 2015, 9:51 
Offline
User avatar

Joined: July 11th, 2015, 18:20
Posts: 8
Location: Mississippi
The JTAGULATOR () can find the main 4 pins of JTAG. But in order to access things meaningfully with Open OCD, it seems like usually you have to have TRST and SRST connected as well. Does anyone have any advice on generically finding these pins? Especially when no pinout is available, or you're dealing with a BGA chip?

Right now I'm trying to perform a data recovery on a Samsung SSD, with a S4LN021X01-8030 microcontroller. I'm going about things mostly like is described here: http://fmad.io/blog-ssd-bricked-restore.html However, I can't get it to halt even when I try all permutations of TRST/SRST on the leftover pins. The debug port looks basically the same as is shown here: viewtopic.php?f=10&t=30695, but with one less pin - so 1 pin ground, 4 pins TDO/TDI/TCK/TMS, and 2 pins unknown, but neither of which help to halt when connected to TRST/SRST on my Bus Blaster jtag.

Thoughts from the hardware experts?

_________________
- George


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 1 post ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 9 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group