All times are UTC - 5 hours [ DST ]


Forum rules


Please do not post questions about data recovery cases here (use this forum instead). This forum is for topics on finding new ways to recover data. Accessing firmware, writing programs, reading bits off the platter, recovering data from dust...



Post new topic Reply to topic  [ 5 posts ] 
Author Message
 Post subject: how can i get the ATA module of Seagate ST3500418AS
PostPosted: August 16th, 2019, 4:38 
Offline

Joined: August 16th, 2019, 4:24
Posts: 3
Location: newyork
Hi~guys.
i am writing a postgraduate thesis focused on seagate firmware and i have developed a F3 tool to reading sysfile of Seagate ST3500418AS .
i do not understand the relationship with sysfile and ATA module. :roll:
how can i get the ATA module of Seagate ST3500418AS ?
if anyone can help me ,thanks a lot.


Attachments:
File comment: my f3 tool
QQ截图20190816163355.png
QQ截图20190816163355.png [ 25.8 KiB | Viewed 532 times ]
Top
 Profile  
 
 Post subject: Re: how can i get the ATA module of Seagate ST3500418AS
PostPosted: August 16th, 2019, 12:09 
Offline
User avatar

Joined: August 15th, 2006, 3:01
Posts: 2690
Location: CDRLabs @ Chandigarh [ India ]
Hi,
ATA Module is In Older Classic Pre F3 Drives Not F3 Drives

_________________
Regards
Amarbir S Dhillon , Chandigarh Data Recovery Labs
Logical,Semi Physical And Physical Data Recovery
Website-> http://www.chandigarhdatarecovery.com


Top
 Profile  
 
 Post subject: Re: how can i get the ATA module of Seagate ST3500418AS
PostPosted: August 17th, 2019, 7:56 
Offline

Joined: February 27th, 2018, 13:02
Posts: 2
Location: Ukraine
amadeus wrote:
how can i get the ATA module of Seagate ST3500418AS ?
if anyone can help me ,thanks a lot.

In terminal at level '1' command 's'.
You must first enable DITS and get modules using DITS:0x144.
More info in 'F3 Serial Port Diagnostics' and 'F3 Diagnostic Functions Manual'.


Top
 Profile  
 
 Post subject: Re: how can i get the ATA module of Seagate ST3500418AS
PostPosted: August 19th, 2019, 2:53 
Offline

Joined: August 16th, 2019, 4:24
Posts: 3
Location: newyork
Amarbir[CDR-Labs] wrote:
Hi,
ATA Module is In Older Classic Pre F3 Drives Not F3 Drives


thank you very much :o


Top
 Profile  
 
 Post subject: Re: how can i get the ATA module of Seagate ST3500418AS
PostPosted: August 19th, 2019, 2:56 
Offline

Joined: August 16th, 2019, 4:24
Posts: 3
Location: newyork
bamb00 wrote:
amadeus wrote:
how can i get the ATA module of Seagate ST3500418AS ?
if anyone can help me ,thanks a lot.

In terminal at level '1' command 's'.
You must first enable DITS and get modules using DITS:0x144.
More info in 'F3 Serial Port Diagnostics' and 'F3 Diagnostic Functions Manual'.


thank you very much . i will give it a try


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 5 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 3 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group