Forum rules
Please do not post questions about data recovery cases here (use this forum instead). This forum is for topics on finding new ways to recover data. Accessing firmware, writing programs, reading bits off the platter, recovering data from dust...how can i get the ATA module of Seagate ST3500418AS
August 16th, 2019, 4:38
Hi~guys.
i am writing a postgraduate thesis focused on seagate firmware and i have developed a F3 tool to reading sysfile of Seagate ST3500418AS .
i do not understand the relationship with sysfile and ATA module.
how can i get the ATA module of Seagate ST3500418AS ?
if anyone can help me ,thanks a lot.
i am writing a postgraduate thesis focused on seagate firmware and i have developed a F3 tool to reading sysfile of Seagate ST3500418AS .
i do not understand the relationship with sysfile and ATA module.
how can i get the ATA module of Seagate ST3500418AS ?
if anyone can help me ,thanks a lot.
- Attachments
-
- my f3 tool
Re: how can i get the ATA module of Seagate ST3500418AS
August 16th, 2019, 12:09
Hi,
ATA Module is In Older Classic Pre F3 Drives Not F3 Drives
ATA Module is In Older Classic Pre F3 Drives Not F3 Drives
Re: how can i get the ATA module of Seagate ST3500418AS
August 17th, 2019, 7:56
amadeus wrote:how can i get the ATA module of Seagate ST3500418AS ?
if anyone can help me ,thanks a lot.
In terminal at level '1' command 's'.
You must first enable DITS and get modules using DITS:0x144.
More info in 'F3 Serial Port Diagnostics' and 'F3 Diagnostic Functions Manual'.
Re: how can i get the ATA module of Seagate ST3500418AS
August 19th, 2019, 2:53
Amarbir[CDR-Labs] wrote:Hi,
ATA Module is In Older Classic Pre F3 Drives Not F3 Drives
thank you very much
Re: how can i get the ATA module of Seagate ST3500418AS
August 19th, 2019, 2:56
bamb00 wrote:amadeus wrote:how can i get the ATA module of Seagate ST3500418AS ?
if anyone can help me ,thanks a lot.
In terminal at level '1' command 's'.
You must first enable DITS and get modules using DITS:0x144.
More info in 'F3 Serial Port Diagnostics' and 'F3 Diagnostic Functions Manual'.
thank you very much . i will give it a try
Re: how can i get the ATA module of Seagate ST3500418AS
June 29th, 2020, 9:44
bamb00 wrote:You must first enable DITS and get modules using DITS:0x144.
More info in 'F3 Serial Port Diagnostics' and 'F3 Diagnostic Functions Manual'.
There is no info about DITS commands, only DETS....
Can you give me an example of DITS:0x144, please.
Powered by phpBB © phpBB Group.