Board number is 100406540 E C8048
Board is damaged eprom is good though, the controller is a seagate chip, spindle controller is a TI chip and ram is a samsung, here is the full rundown on board
I am doing this for a photographer friend, im just a linux geek and trying to help someone out but have an electronics background. Not trying to make any money off of anyone BUT as i have gotten thrust into this i do have shitloads of HD's sitting around.
I am going to gut all my spare parts systems this week and see if we might not be able to help out a few others in the process. I will generate a spreadsheet with what i have as i get them finished and post if back up here. SO while asking someone to help me out, i am also looking to see how many others i can help out in the process, hopefully karma can smile at both of us in the process.
here is the Drive details.
Thanks for your time.

Seagate Barracuda 7200.10
500 Gbytes

S/N 90G3YWVE
ST3500830AS
P/N 9BJ136-224
Firmware: 3.AAD
Data Code: 08081 Site Code: TK

small sticker on bottom of drive
TonkaMD/Galaxy3D
1078 2
001F6
100376784

small sticker on controller card
100406540 E C8048NUR

Chips on Controller Card

Controller: Seagate Technologies (ST on chip)
V486AD
100404226
V486ADDISCR
VG620237
99159
MYS 8U 722

Spindle Controller
Texas Instruments
980 L
SH6960B E
76AKL5W
G4

Ram
Samsung 728
K4S641632k-UC60
S6416 ZTQ342IGS


Eprom or at least im pretty sure, havent tried to pull datasheets to verify.
Doubtful datasheet it exists if it is eprom

Seagate Technologies
25P05vp
9728y

hello,
i would like to help if i can. please add my MSN.thanks.

_________________
data recovery service[/b]