this would be correct you need some type of guide line for the tool to line up correctly with the top headstack
then you know for sure about the other headstack beneath
when removing it

its a good cheap tool for sure

This tool looks good and price is more than fair, but I still think Nikola's tool is the alpha and omega for this job.

_________________
Northwind Data Recovery - Greece
WD Trusted Partners
http://www.northwind.gr
SandForce SSD Recovery

Of course HDDSurgery tools are more usable, it is true.

But if you look at low-cost segment you will see H**C and S*******n D**a products only. Quality of them - that is the question! Try to search some info in this forum, this is really interesting.

--
Best regards,
ER-Tools lead developer,
Alexander Erofeev.

Khabarovsk, Russia.

mailto: info@er-tools.com
skype: er-tools

That's true Alexander ehehehhe

_________________
http://www.facebook.com/PCLAB.Assistencia.Tecnica
ACELab partner

hello Alexander, do you have a tool working for the seagate 7200-14(ST3000DM001)?

Actually not. But tools for these drives in nearest plans.

_________________
ER-Tools : An easy heads replacement solution
http://er-tools.com/

Hello, i recived the tool yesterday but i had to pay € 17,50 of customs charges.
I will try it when I have some time to experiment...

Thank you

Your welcome! I guess many people hope to see some impression from you soon

_________________
ER-Tools : An easy heads replacement solution
http://er-tools.com/

In the video posted on youtube you can see that the tool is used on a ST31500341AS drive:
http://www.youtube.com/watch?v=-972i020Xvs
as you can see the tool relies on the plastic case of the disc (HDA contact removed), but on other drive models the tool wiil not fit if you remove HDA.

I tried the tool on a ST3500320AS, it fits only if i keep HDA contacts mounted.
http://en.er-tools.com/catalog/item/12
Comments? ...

Sorry, if I didn't understand correctly that exactly you mean.

You must to set the tool carefully, by moving it from outside platters area close to the head stack arm. And during this process tool relies just on the platters only, not on the HDA case. And of course flat cable connector of the head stack must be unscrewed before any yours actions. This connector absolutely not needed for setting/removing tool process. In demo video I just cut off it for easy demostration only.

_________________
ER-Tools : An easy heads replacement solution
http://er-tools.com/

a consideration out of this head swap function of the tool:
it would be nice to have a "store tools" which allow us to safetly store heads.

Hello guys!

Tools for Maxtor hard drives is available. I know hard drives such as DiamondMax Plus 9 and DiamondMax 10 are too old, but sometimes I still see them in my small DR company

For more information just vist my web page.

_________________
ER-Tools : An easy heads replacement solution
http://er-tools.com/

Dear friends! I wish you happy New Year, many positive emotions, many successful head swaps with ER-Tools of course

Thanks you guys for your support. I hope my tools was very helpful for you in 2013 and will stay helpful in 2014!

_________________
ER-Tools : An easy heads replacement solution
http://er-tools.com/

Dear friends! New redesigned tools will be in stock soon! Check new 5th version on images below.




Also some new tools for WD hard drives are finished. You can see below tool for removing heads from the ramp, and tool for unstick heads from the platters.











All tools will be availible for ordering after 1st may. Please follow the news at er-tools.com

_________________
ER-Tools : An easy heads replacement solution
http://er-tools.com/

A very simple ramp tool for Seagate Momentus 5400.4, 5400.5, 5400.6 and 7200.4:





Tool for unstick heads from the platters:






VIDEO: http://www.youtube.com/watch?v=ejA0Lv60lyk

All tools will be availible for ordering after 1st may. Please follow the news at er-tools.com

_________________
ER-Tools : An easy heads replacement solution
http://er-tools.com/

Hi Alexander,
You've convinced me, have just ordered for Samsung F1 - F3
Cheers from Oz

Dear friends, new tools for Seagate FreePlay are available. Tools are compatible with hard drives from Marina and Sentosa families with three or four platters.

For more information follow the link: http://en.er-tools.com/catalog/item/1831

_________________
ER-Tools : An easy heads replacement solution
http://er-tools.com/

Looks good Alexander

Digitalsupport

_________________
Digitalsupport Data Recovery
https://digitalsupport.dk

By the way, for anyone who's wondering. I have purchased these tools (the Seagate ones) and they work beautifully. A simple design that just works. They hold in place nicely even while transferring the heads over to the other drive.

The only issue I've noticed is that removing the tool from under the heads slowly is difficult. Sometimes the clip is prone to pop out suddenly dropping the heads onto the platters faster than I'd like. Not a huge issue, but it might be worth redesigning the clip to be a bit less pronounced making it smoother when removing.

Still an A+ tool at a reasonable price.

_________________
Data Medics - Hard Drive and RAID Data Recovery Service Company

@data-medics, thanks for the post. I had asked two people who had tried their tool and opinions were not good, so it's great to hear you found them great, for the most part. With a minimum order value of $100 + S/H, I wasn't about to just try them without reading some positive feedback first.

_________________
Sabo Computer Repairs & Data Recovery