data-medics wrote:
Loving the Seagate ones I have already.
Many thanks, i try my best to make a cheap and useful tools. 
I answered to PM, check please.
| HDD GURU FORUMS http://forum.hddguru.com/ |
|
| ER-Tools - new simple head stack replacement tools http://forum.hddguru.com/viewtopic.php?f=15&t=26580 |
Page 4 of 6 |
| Author: | Banky [ December 15th, 2015, 22:30 ] |
| Post subject: | Re: ER-Tools - new simple head stack replacement tools |
Please I need your tools. When will they be available ?? I have been waiting since May, 2015. Please let me know how long am to wait or should I start looking else where ?. Thank you. Oladoja Bankole Exclusive Data Recovery Lab Abuja Nigeria www.edarlab.com |
|
| Author: | LarrySabo [ December 15th, 2015, 23:26 ] |
| Post subject: | Re: ER-Tools - new simple head stack replacement tools |
@Banky, have you e-mailed them to tell them what particular tools you need? They will then add them to the production schedule and tell you when to expect them to be ready. |
|
| Author: | ER-Tools [ December 16th, 2015, 1:44 ] |
| Post subject: | Re: ER-Tools - new simple head stack replacement tools |
data-medics wrote: Loving the Seagate ones I have already. Many thanks, i try my best to make a cheap and useful tools. I answered to PM, check please.
|
|
| Author: | ER-Tools [ December 16th, 2015, 1:56 ] |
| Post subject: | Re: ER-Tools - new simple head stack replacement tools |
Banky, i answered to email, please check. |
|
| Author: | ER-Tools [ January 25th, 2016, 6:57 ] |
| Post subject: | Re: ER-Tools - new simple head stack replacement tools |
Many people asked about the tools for Samsung M8 (ST1000LM024 etc). Finally done!     If are you are interested in purchasing please send me PM or email ( info@er-tools.com ) |
|
| Author: | pclab [ January 25th, 2016, 10:06 ] |
| Post subject: | Re: ER-Tools - new simple head stack replacement tools |
Pretty cool tools, but why are they always out of stock? You manufacture after the order is made? |
|
| Author: | ER-Tools [ January 26th, 2016, 2:17 ] |
| Post subject: | Re: ER-Tools - new simple head stack replacement tools |
pclab wrote: Pretty cool tools Thanks!  pclab wrote: but why are they always out of stock? Sometimes tools are in stock, but they are sold quickly. Let me know which tools you are interested in, i will add your order to the plan of manufacture. When the tools are will be ready, you will be able to make a payment, and finally tools will be sent.
You manufacture after the order is made? |
|
| Author: | Amarbir[CDR-Labs] [ January 26th, 2016, 15:01 ] |
| Post subject: | Re: ER-Tools - new simple head stack replacement tools |
Hi , In My First lot i am interested in the following .Will appreciate some combined discount as we are in india and not canada/usa or Europe where they charge good amount from clients . Seagate 1 : Seagate Freeplay 4D - > http://en.er-tools.com/catalog/item/1839 2 : Seagate Momenteus 2D - > http://en.er-tools.com/catalog/item/1830 Samsung 1 : Samsung M8 Series -> http://en.er-tools.com/catalog/item/1838 PS : Toshiba And Hitachi 3.5" and 2.5" Have Become Very Very Common And We Are Expecting People like you to make cheap good quality tools for those also .Also Please consider some tools for Western Digital 2.5" HDD also .They Have Alarmingly High Head Stick Issue And The Technique Of Actually unsticking then is different .Might be i can pm you that if you like .Also are you considering making Head Ramps Tool Kits Alone Like They have in China . PS2 : Would Be interested To Resell Your Tools As Official Distributor In India If You Like Me To . PS3 : If i feel that the quote for shipping is high then i might add few 3.5" family head combs also |
|
| Author: | Amarbir[CDR-Labs] [ January 31st, 2016, 2:44 ] |
| Post subject: | Re: ER-Tools - new simple head stack replacement tools |
Hello Sir , Thanks For The PM To Me But Other Then The Commercials of My Purchase Can You discuss The Other Things i Pointed Out In this thread of yours As then Other People Senior Or Junior To Me Can Also Participate And share Thier Views .The More People Participate The Better it Is for Tools Improvement And New Ideas . |
|
| Author: | ER-Tools [ January 31st, 2016, 3:16 ] |
| Post subject: | Re: ER-Tools - new simple head stack replacement tools |
Ask free if you have additional questions or ideas  I answer to PM about purchasing or any other commercial offers, all other questions can be discussed here.P.S. And please, keep in mind, it's really hard to understand something, when all the words begin from big letter... 
|
|
| Author: | hdd2fix [ February 2nd, 2016, 3:36 ] |
| Post subject: | Re: ER-Tools - new simple head stack replacement tools |
helpdisc wrote: I like the moust labeling of the tools Taking them off could be a problem I beleive. On 2:49 (this video https://www.youtube.com/watch?v=-972i020Xvs ) I can see that it is not so complicated, correct me if I wrong? |
|
| Author: | ER-Tools [ February 2nd, 2016, 22:05 ] |
| Post subject: | Re: ER-Tools - new simple head stack replacement tools |
hdd2fix, you aren't wrong, tool coming out with a little resistance. To take off the tool just pull it carefully, in fact it's not complicated. But before try to use any tool on client's hard drive, i recommend to train with your own disks. Experience is very important. |
|
| Author: | Amarbir[CDR-Labs] [ May 10th, 2016, 11:05 ] |
| Post subject: | Re: ER-Tools - new simple head stack replacement tools |
ER-Tools wrote: hdd2fix, you aren't wrong, tool coming out with a little resistance. To take off the tool just pull it carefully, in fact it's not complicated. But before try to use any tool on client's hard drive, i recommend to train with your own disks. Experience is very important. Hello , In My Opinion Mounting The Top Screw on HSA Helps a Lot in Proper Tool Removal |
|
| Author: | Amarbir[CDR-Labs] [ May 10th, 2016, 22:21 ] |
| Post subject: | Re: ER-Tools - new simple head stack replacement tools |
Hi Everyone , This is Now ordered and paid for -> http://en.er-tools.com/catalog/item/1832 This is the All In One [ Mega Pack ] . I Have Excluded The Maxtor Hard Drive Head Tools And Instead Opted For Something Else .Sir Was Kind Enough To Oblige .Now My Wishlist Includes They Manufacturer RAMP Sets For Western Digital , Seagate ,Samsung And Toshiba/Hitachi .I Also Hope To See Toshiba / Hitachi Kits Soon .Concentration on Ramp + Unstuck Tool For Western Digital 2.5" USB Drives Is Must .New Model OF Seagate/Samsung ST2000LM Series With 3 Platters And 6 Heads .Let Me Know If You Have a Problem Finding a Drive .CDRLabs Now Has a Extensive Hard Drive Inventory of Approx 10,000 HDD's .Largest In Our Area |
|
| Author: | Amarbir[CDR-Labs] [ June 2nd, 2016, 13:08 ] |
| Post subject: | Re: ER-Tools - new simple head stack replacement tools |
Hello Alexander , Today I Recieved The All In One [ Mega Kit ] . I Am Also Pleased To Recieve The Little Gist You Send Me . PS : Guys Alexander Was Kind Enough To Send Me a Beta Sample Of His Incoming Toshiba 2.5" HDD Head Swap [ 2 Ramp HS Modules ] + 1 Unstick Tool .He Was Also Kind Enough To Handle 2 Of My Other Requests That i Would Like To Remain Private . Well Alexander This is My Wishlist And i Know You Are Working On It Western Digital 1 : Please Make Tools For 1TB 2 Platter And Western Digital 4 Platter 2.5" Series With Unstick Tool Samsung 1  lease Consider Making Tool For M9 Series Specially 2TB Three Platter M9's In 2.5 InchToshiba/Hitachi 1 : You Know You Have To Make Most of The Tools In This in 3.5" And 2.5" PS : Can You Please Consider Making Small Boxes For These Tools I Have Tried To Arrange Some Boxes Myself But Something Like HDDsurgury Would Be Amazing "I Would Love To Buy Those With Extra Payment Also .Please Keep Me in The Line For Any New Development And i Would And Should Be The First Person To Buy The Tools .Just Amazing Quality And Finish They Had |
|
| Author: | ER-Tools [ June 2nd, 2016, 23:58 ] |
| Post subject: | Re: ER-Tools - new simple head stack replacement tools |
Thanks a lot Amarbir for your interest and support, many thanks to all guys who already use my tools in data recovery, and want more new tools for other hard drives! All of the tools above will be available soon. And be sure, all interesting news i will post here About small boxes for storing tools - it's a good idea, i think it must be something anti static with dust proof feature... Need to think about it more
|
|
| Author: | Amarbir[CDR-Labs] [ June 3rd, 2016, 3:21 ] |
| Post subject: | Re: ER-Tools - new simple head stack replacement tools |
ER-Tools wrote: Thanks a lot Amarbir for your interest and support, many thanks to all guys who already use my tools in data recovery, and want more new tools for other hard drives! All of the tools above will be available soon. And be sure, all interesting news i will post here About small boxes for storing tools - it's a good idea, i think it must be something anti static with dust proof feature... Need to think about it more Hi, My Suggestion For boxes would Be As Under 1 : Small Box [ 1 Toolset Per Box ] 2 : Mid Range Box [ 1 complete Family Tools Per Box ] 3 : Large Range Box [ 1 Complete Unit With Storage For All Drive Family ] I Really Appreciate If No 1 And No 2 Suggestion Could Be Handled Soon so that We Could Store your Sensitive Tools " As Plexiglass Is More Fragile Then Aluminium Thats Used In HDDSurgery Tools " . Hddsurgury has amazing boxes made out of wood and carved using his CNC Machine |
|
| Author: | Amarbir[CDR-Labs] [ August 23rd, 2016, 16:39 ] |
| Post subject: | Re: ER-Tools - new simple head stack replacement tools |
Hello Alexaner , Sen You a Email For New Tools Please check and replay back |
|
| Author: | ER-Tools [ August 24th, 2016, 2:03 ] |
| Post subject: | Re: ER-Tools - new simple head stack replacement tools |
Hello, answered to email too
|
|
| Author: | Amarbir[CDR-Labs] [ August 27th, 2016, 13:51 ] |
| Post subject: | Re: ER-Tools - new simple head stack replacement tools |
ER-Tools wrote: Hello, answered to email too Hello , I Have Emailed You With a New Order With 5 New Tools ,But No Response To Me Email Send Few Days Ago ,Please Respond On Email Or PM |
|
| Page 4 of 6 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|