All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 6 posts ] 
Author Message
 Post subject: PCB/Controller Board WD 4061 705094 302 rev 03P
PostPosted: October 1st, 2013, 13:10 
Offline

Joined: September 29th, 2013, 10:37
Posts: 11
Location: Indonesia
Hello

I got my WD My Book 3 TB Burned
and i desperately need the replacement board because i have very important data in it

I am actually confused how to read to find the matching board

On this side it's written 4060-705094-001 Rev. A
Attachment:
IMG-20130930-00185.jpg
IMG-20130930-00185.jpg [ 416.54 KiB | Viewed 7046 times ]


So i bought it from e-bay. and the result was that the drive seems to be locked and read as raw (so i can assume the board is not yet matched)

on the other side of the board it was written as : 4061 705094 302 rev 03P
Attachment:
IMG-20130930-00195.jpg
IMG-20130930-00195.jpg [ 480.44 KiB | Viewed 7046 times ]


So now i need the 4061 705094 302 rev 03P to see if it's working as expected (unable to unlock my 3Tb drive

My location is in Indonesia

I need it very much, so please kindly help me :)


Top
 Profile  
 
 Post subject: Re: PCB/Controller Board WD 4061 705094 302 rev 03P
PostPosted: October 1st, 2013, 16:16 
Offline
User avatar

Joined: September 8th, 2009, 18:21
Posts: 15539
Location: Australia
How did you burn it?

Where are the burn marks?

Can you provide a better photo?

Was your drive an Essentials model or an Elements?

_________________
A backup a day keeps DR away.


Top
 Profile  
 
 Post subject: Re: PCB/Controller Board WD 4061 705094 302 rev 03P
PostPosted: October 1st, 2013, 22:46 
Offline

Joined: September 29th, 2013, 10:37
Posts: 11
Location: Indonesia
Thank you for the reply

To be honest i don't know if it's burned or something, all i know that it can't read my hard disk (only the board light indicator is on but now drive read when plugged to usb3 port), so maybe the usb3 port on the board...

I will provide better picture as soon as i can get my hand on better cam here

the drive is this (on the box only written MY BOOK)
Attachment:
IMG_1565.jpg
IMG_1565.jpg [ 32.74 KiB | Viewed 7011 times ]


thank you


Top
 Profile  
 
 Post subject: Re: PCB/Controller Board WD 4061 705094 302 rev 03P
PostPosted: October 2nd, 2013, 1:48 
Offline
User avatar

Joined: September 8th, 2009, 18:21
Posts: 15539
Location: Australia
You could try scanning the PCB (depending on the type of scanner).

The reason I asked whether yours was an Essentials is that some models are encrypted. The box indicates that it is. :-(

Anyway, are we to understand that your data are now accessible via USB 3.0?

_________________
A backup a day keeps DR away.


Top
 Profile  
 
 Post subject: Re: PCB/Controller Board WD 4061 705094 302 rev 03P
PostPosted: October 2nd, 2013, 12:04 
Offline

Joined: September 29th, 2013, 10:37
Posts: 11
Location: Indonesia
fzabkar wrote:
You could try scanning the PCB (depending on the type of scanner).

The reason I asked whether yours was an Essentials is that some models are encrypted. The box indicates that it is. :-(

Anyway, are we to understand that your data are now accessible via USB 3.0?



So it's encrypted indeed
No, the data is not acessible at all
I've tried to connect it with new generic board and the result is this

Locked (in WD software)
Image

Read as raw in Windows Management

Image

and when i tried to run it with some file/partition recovery here's the result
Get Databack (i/o error or unknown error)
-active file recovery (it says no item found)
-R-studio
-GetData Recover My Files Pro ()

none of'em be able to open anything (nothing found)

So that's why i'm now assuming that i need a board with the same exact revision number, just like stated in first post


Anyway, here's some picture i took, i hope this one is better
Attachment:
DSC_0003.jpg
DSC_0003.jpg [ 2.13 MiB | Viewed 6979 times ]

Attachment:
DSC_0004.jpg
DSC_0004.jpg [ 2.75 MiB | Viewed 6979 times ]

Attachment:
DSC_0006.jpg
DSC_0006.jpg [ 1.81 MiB | Viewed 6979 times ]

Attachment:
DSC_0009.jpg
DSC_0009.jpg [ 1.61 MiB | Viewed 6979 times ]

Thank you in advance


Attachments:
DSC_0003.jpg
DSC_0003.jpg [ 2.13 MiB | Viewed 6979 times ]
Top
 Profile  
 
 Post subject: Re: PCB/Controller Board WD 4061 705094 302 rev 03P
PostPosted: October 4th, 2013, 3:03 
Offline
User avatar

Joined: September 8th, 2009, 18:21
Posts: 15539
Location: Australia
I have replied in your other post. Sorry, I didn't notice that this was the market section.

_________________
A backup a day keeps DR away.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 6 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 62 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group