All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 6 posts ] 
Author Message
 Post subject: PCB for WD 2060-701692-000
PostPosted: March 15th, 2016, 12:46 
Offline

Joined: September 7th, 2012, 16:37
Posts: 118
Hello,

Anyone who has this PCB WD 2060-701692-000 for sale?

if yes, pm me :)

Regards,


Top
 Profile  
 
 Post subject: Re: PCB for WD 2060-701692-000
PostPosted: March 22nd, 2016, 7:51 
Offline

Joined: December 16th, 2015, 12:37
Posts: 72
Location: GCC
you need

2060-701692-005 ?

is it ok ?
let me know

_________________
http://www.alwasat4pc.com


Top
 Profile  
 
 Post subject: Re: PCB for WD 2060-701692-000
PostPosted: March 22nd, 2016, 8:58 
Offline
User avatar

Joined: April 3rd, 2011, 0:19
Posts: 1616
Location: Providence, RI
You can probably replace it with a 2060-771692-000 instead. They're more readily available and I don't think it matters if it's a -70 or -77 in most cases.

_________________
Hard Drive & RAID Data Recovery Services
https://www.data-medics.com/raid-data-recovery/


Top
 Profile  
 
 Post subject: Re: PCB for WD 2060-701692-000
PostPosted: March 22nd, 2016, 9:57 
Offline

Joined: December 16th, 2015, 12:37
Posts: 72
Location: GCC
data-medics wrote:
You can probably replace it with a 2060-771692-000 instead. They're more readily available and I don't think it matters if it's a -70 or -77 in most cases.



i think there is matter between this 2 pcb ... some Hdds not sniping with this pcb 77

let's make sure about this point

_________________
http://www.alwasat4pc.com


Top
 Profile  
 
 Post subject: Re: PCB for WD 2060-701692-000
PostPosted: November 11th, 2016, 5:52 
Offline

Joined: June 25th, 2006, 13:51
Posts: 113
When drive is not spinning I suggest to

- 1th check the chip brand and number that controls the spindle and the heads
- write the ROM or move the chip, and try spinning with the correct ROM
- BEWARE SO MUCH to screw FIRST the 2 heads screw and only AS LAST the motor screw/s otherwise you may miss the proper contact.
As additional checking I'd advise to check that the board is parallel with the HDD body. With those motor contacts that are next the HDD body border (not those close to the motor pivot) usually it happen that the screw will not totally enter in the hole and instead it will overlap the hole border


Top
 Profile  
 
 Post subject: Re: PCB for WD 2060-701692-000
PostPosted: March 9th, 2017, 12:17 
Offline

Joined: September 7th, 2012, 16:37
Posts: 118
data-medics wrote:
You can probably replace it with a 2060-771692-000 instead. They're more readily available and I don't think it matters if it's a -70 or -77 in most cases.


just for your information, I tried to replace a SATA PCB 2060-701692-000 with a 2060-771692-000 for a USB PCB 2060-771754-000 and IT WORKS VERY WELL.

Thanks DATA-METRICS for your advice.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 6 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 5 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group