June 15th, 2017, 16:35
June 16th, 2017, 8:46
June 16th, 2017, 17:51
June 16th, 2017, 18:52
June 16th, 2017, 19:13
SlingShot wrote:I've seen a perfect unit here for £1000 but alas I don't have it to spare right now
June 16th, 2017, 19:25
Blizzard wrote:SlingShot wrote:I've seen a perfect unit here for £1000 but alas I don't have it to spare right now
I started out with that Air Science Purair FLOW-24 unit and it is not perfect
I found out immediately that I needed to add an acrylic sheet to the front to increase air flow inside. It's a poor design in my opinion. Maybe I had a lemon but I did buy it brand new.
June 16th, 2017, 20:47
June 17th, 2017, 3:33
June 17th, 2017, 3:42
June 17th, 2017, 4:35
Blizzard wrote:Using Nuaire NU-126-400 now.
northwind wrote:And this is what I have
http://hddsurgery.com/data-recovery-too ... -cabinet-m
Top notch.
June 17th, 2017, 8:05
June 17th, 2017, 8:28
June 17th, 2017, 8:39
LarrySabo wrote:Here's mine: https://forum.hddguru.com/viewtopic.php?f=1&t=29602
June 17th, 2017, 9:07
June 17th, 2017, 12:24
LarrySabo wrote:Here's mine: https://forum.hddguru.com/viewtopic.php?f=1&t=29602
June 17th, 2017, 17:27
June 19th, 2017, 16:19
LarrySabo wrote:@Slingshot, thanks. I don't have a particle counter so cannot be sure what the "Class" rating is, but believe it's Class 100 (100 particles per cubic foot). I don't notice any particles on top platters but particles too small to be resolved with the naked eye could be present and I'd not detect them without a laser particle counter. I've done many successful head swaps in my chamber, which is what counts.
I just finished a 24"-wide version of the chamber and noticed in reviewing the drawings for the V2 version that there is an error. In the top half, the sum of the individual widths exceeds the total width of the material (48"). This 24" version uses a HEPA filter that removed 99.97% of particles 0.1+ microns in diameter, and has a working area that is slightly deeper (12") than the V2 version. It is intended to be transportable for on-site inspections, so has latches that hold the cover securely closed.
Anyway, feel free to modify the design to suit your preference.
June 19th, 2017, 17:00
July 19th, 2017, 2:58
Powered by phpBB © phpBB Group.