All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 12 posts ] 
Author Message
 Post subject: Reading Monolith SD cards without soldering - it's possible!
PostPosted: January 28th, 2018, 14:15 
Offline
User avatar

Joined: December 29th, 2016, 18:13
Posts: 141
Location: Poland
Hello guys,

After over 6 months of hard and intensive work including many projects, prototyping, checking different configurations we can announce officially that NEW monolith MR SD Cards adapters are officially READY !

What cards does they support ?
Image
Image
Image
Image
Image

Ofcourse each of this can be connected beetwen devices as VNR (Rusolut), Flash Extractor (Soft Center) or PC3000 Flash v4 (Ace Laboratory) without any soldering. Each of adapter support different card size by inners and can support different pinout configuration by special socket (look to movie to see how simple we can change pinout from 1 type of pinout to second one... as examples for 2th channel). Impossible ??? ;) Check 36 minutes movie at https://youtu.be/GPHeLh1NwIw

Below photos will give more information about supported size and configurations !!!

MR39 configuration and supported card sizes as below:
Image

MR29 configuration and supported card sizes as below:
Image

MR40 configuration and supported card sizes as below:
Image

MR42 configuration and supported card sizes as below:
Image

MR35 configuration and supported card sizes as below:
Image

Some socket photos below:
Image
Image
Image

How to install adapters on different devices as VNR, FE, PC3000 Monolith board v4 or Multiboard ?

Image
Image
Image
Image

Below links:
Video of using MR40, 42, 39, 35, 29 SD adapters- https://youtu.be/GPHeLh1NwIw
MR40 SD Monolith product link - https://multi-com.eu/shrt-C8DWgvxEH
MR42 SD Monolith product link - https://multi-com.eu/shrt-pED0xFc0z
MR39 SD Monolith product link - https://multi-com.eu/shrt-IUi3QcYPI
MR35 SD Monolith product link - https://multi-com.eu/shrt-UWceLvp3
MR29 SD Monolith product link - https://multi-com.eu/shrt-3hZAWCvLu


P.S#1
Companies interested in reselling contact directly to biuro@multi-com.pl for quotes.

P.S#2
If you are looking microSD cards MR series adapter look at http://forum.hddguru.com/viewtopic.php?f=15&t=35872

_________________
Best regards,
Boguslaw Rzepka,
Multi-COM Ltd., Poland


Top
 Profile  
 
 Post subject: Re: Reading Monolith SD cards without soldering - it's possi
PostPosted: January 28th, 2018, 15:12 
Offline
User avatar

Joined: September 8th, 2009, 18:21
Posts: 15462
Location: Australia
Very impressive!

_________________
A backup a day keeps DR away.


Top
 Profile  
 
 Post subject: Re: Reading Monolith SD cards without soldering - it's possi
PostPosted: January 29th, 2018, 4:36 
Offline
User avatar

Joined: January 6th, 2015, 2:21
Posts: 186
Location: Germany
Nice work!

_________________
Web: https://www.day1data.de


Top
 Profile  
 
 Post subject: Re: Reading Monolith SD cards without soldering - it's possi
PostPosted: January 29th, 2018, 13:52 
Offline
User avatar

Joined: August 15th, 2006, 3:01
Posts: 3464
Location: CDRLabs @ Chandigarh [ India ]
State of the art ,
Will start reselling and using in india ASAP :mrgreen:

_________________
Regards
Amarbir S Dhillon , Chandigarh Data Recovery Labs [India]
Logical,Semi Physical And Physical Data Recovery
Website-> http://www.chandigarhdatarecovery.com


Top
 Profile  
 
 Post subject: Re: Reading Monolith SD cards without soldering - it's possi
PostPosted: January 30th, 2018, 16:13 
Offline

Joined: August 18th, 2010, 17:35
Posts: 3636
Location: Massachusetts, USA
Very nice. Is there development for Micro SD Cards soon, too?

_________________
Hard Disk Drive, SSD, USB Drive and RAID Data Recovery Specialist in Massachusetts


Top
 Profile  
 
 Post subject: Re: Reading Monolith SD cards without soldering - it's possi
PostPosted: January 30th, 2018, 16:48 
Offline
User avatar

Joined: March 6th, 2010, 3:46
Posts: 601
Location: Kolding | Denmark
labtech wrote:
Very nice. Is there development for Micro SD Cards soon, too?


Labtech, did you see this: viewtopic.php?f=15&t=35872

_________________
Digitalsupport Data Recovery
https://digitalsupport.dk


Top
 Profile  
 
 Post subject: Re: Reading Monolith SD cards without soldering - it's possi
PostPosted: January 31st, 2018, 11:19 
Offline
User avatar

Joined: August 15th, 2006, 3:01
Posts: 3464
Location: CDRLabs @ Chandigarh [ India ]
labtech wrote:
Very nice. Is there development for Micro SD Cards soon, too?



Labtech ,
Bro They Had Released Those Before SD Cards Last Year ,check Their Youtube Channel

_________________
Regards
Amarbir S Dhillon , Chandigarh Data Recovery Labs [India]
Logical,Semi Physical And Physical Data Recovery
Website-> http://www.chandigarhdatarecovery.com


Top
 Profile  
 
 Post subject: Re: Reading Monolith SD cards without soldering - it's possi
PostPosted: February 1st, 2018, 22:33 
Offline

Joined: August 18th, 2010, 17:35
Posts: 3636
Location: Massachusetts, USA
Yep, I missed that. My bad. Good stuff.

_________________
Hard Disk Drive, SSD, USB Drive and RAID Data Recovery Specialist in Massachusetts


Top
 Profile  
 
 Post subject: Re: Reading Monolith SD cards without soldering - it's possi
PostPosted: February 7th, 2018, 14:24 
Offline
User avatar

Joined: December 29th, 2016, 18:13
Posts: 141
Location: Poland
Thank you for all good words - since receiving a questions on PM how pinout configuration is changed in MRSD adapters just few words with explanation to make all clear since many of you don't have time to watch full video from us. So.....pinouts are changed by so called sockets which fit to adapter.

Socket for MR40 looks like:
Image

Each of socket got name like for example
"MR40AP1" where:
MR40 - adapter model
AP1 - Alternative Pinout 1

to use them so to change pinout in less than 10 second we simply make ALL switches on adapter to OFF position and put socket into adapter. After installation in adapter it will look like this:
Image

Similar are for other adapters like MR35:
Image

and after installation

Image

but there are adding some information like C1/C2 so on socket you will see

MR35AP2C1 which means
MR35 - MR35 adater type
AP2 - aleternative pinout 2
C1 - channel 1 (so reading by 8 bit bus from first channel)... if you will use C2 it will read second channel

And final answer to questions about additional sockets updates with new pinouts ???? ;) YES - we will make additional sockets if raster of card will fit.... even more: each customer who will send to us card and pinout for new configuration will receive FREE SOCKET ! So if after 6 months you will use our adapter and will find card with different pinout configuration to which you got pinout just send us this card and pinout - we will make inner for different size (if necessary) + socket for this pinout and send you for free of charge including shipment.....

_________________
Best regards,
Boguslaw Rzepka,
Multi-COM Ltd., Poland


Top
 Profile  
 
 Post subject: Re: Reading Monolith SD cards without soldering - it's possi
PostPosted: February 20th, 2018, 23:06 
Offline
User avatar

Joined: August 15th, 2006, 3:01
Posts: 3464
Location: CDRLabs @ Chandigarh [ India ]
Hi Boguslaw ,
I have sent you a email for reselling Products in India .Kindly Check your email and respond back ,Its been a few hours since i have emailed .

_________________
Regards
Amarbir S Dhillon , Chandigarh Data Recovery Labs [India]
Logical,Semi Physical And Physical Data Recovery
Website-> http://www.chandigarhdatarecovery.com


Top
 Profile  
 
 Post subject: Re: Reading Monolith SD cards without soldering - it's possi
PostPosted: February 21st, 2018, 12:08 
Offline
User avatar

Joined: December 29th, 2016, 18:13
Posts: 141
Location: Poland
Hello Amarbir,

Answered ;)))

_________________
Best regards,
Boguslaw Rzepka,
Multi-COM Ltd., Poland


Top
 Profile  
 
 Post subject: Re: Reading Monolith SD cards without soldering - it's possi
PostPosted: October 10th, 2022, 23:51 
Offline

Joined: April 17th, 2022, 22:39
Posts: 44
Location: Vietnam
Is there anyway i could know which MR to buy??

And which one are most versatile, most used by SD companies, like Sandisk, Kingston, Lex???


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 12 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: Google [Bot] and 14 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group