All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 14 posts ] 
Author Message
 Post subject: eMMC / eMCP NAND adapters without soldering - READY !
PostPosted: September 13th, 2018, 3:55 
Offline
User avatar

Joined: December 29th, 2016, 18:13
Posts: 140
Location: Poland
Hello guys,

As you know first was microSD (https://forum.hddguru.com/viewtopic.php?f=15&t=35872), then SD (https://forum.hddguru.com/viewtopic.php?f=15&t=36364) and now after over 6 months (exactly almost 8 ;)) of hard work and many , many.... many hours spended on reverse engineering, proobing with LA, creating prototypes, testing we want to anounce officially that new series of MR adapters for readign eMMC/eMCP memory over NAND was released !!!!

What raster of eMMC / eMCP are supported (informaiton what are raster look below iun FAQ)
Image Image

Image Image

Image Image

Image Image

Image Image

Image Image


Chips / Pinouts supported at the moment (pinouts / chips support are realised over sockets - check FAQ)

Image Image

Image Image

Image Image

Image Image

Image Image

Image Image


FAQ:
Q: What are those and what for ???
A: Adapters as a standard comes with pogo pins for connection with technological pins on eMMC or eMCP for choosed raster.

Q: What is raster ?
A: Raster it's localisation of technological pins on card - many cards can use same raster but doesn't mean that it will use same pinout. Similar as with microSD - there are cards that looks similar but using diffrent pinout.

Q: OK - I know what is raster but how I can know which one for my card ?
A: Thats why we are releasing sockets/pinouts that fits to exactly chip - for example if you will get Toshiba chip THGBMGBG7D2KBAIL you will know that you need adapter MR10 and pinout/socket 1 as shown here:
Image

After this you will only put socket onto adapter and you can read as shown here:
Image

Next sample ? Let's say you got IC H26M31001HPR which uses TYPE 8, pinout 2 socket like here:

Image

So you will need take TYPE 8, pinout 2 socket from available 4 pcs of sockets for TYPE 8 eMMC
Image

and simply attach into adapter, after installing for reading using VNR it will looks like this:
Image

Simple as never been before ;)))

Q: What are those for ?
A: Adapters allows to solderless connection to demaged eMMC (by chipoff process, controller corruption, or mechanical demage) for data recovery using such tools as PC3000 Flash, Rusolut VNR or Soft Center Flash Extractor. In case

Q: Can those be used in Forensic cases ?
A: Yes - in case of demaged eMMC which are not initialized correctly, showing only 32Mb, got demaged CID or are dead you got nothing other that accessing data over NAND. Due this you will get access to Garbage Blocks and Unprovisoned Area which are not available for any forensic tool.

Q: If I buy 1 of those are I able to recover my data ? You will help me ?
A: Please note that our company offers adapters for solderless reading - we can help in case of settings for correct reading, connection issues but those adapters replace solderign only and give you READY PINOUUT configuration without need to use Logic Analyzer to find correct pinout. So it's first step to read contest of dead chip. Data recovery from monolith devices are more complicated that reading data over ISP or normal ChipOff. You will need to remove XOR (Wear leveling), fix ECC, assembly correctly image to get RAW which you can then use for see real data. If you are not familiar with those task contact us or any other company which works in flash recovery.

Q: Where I can test ?
A: You can visit our company to see them, test reading on your Chip withtou any problem - in few days we will add YouTube videos so you can watch readign process using diffrent NAND readers too.


Q: Where I can buy them ?
A: All those are available on our page on below links:
MR NAND adapters - https://multi-com.eu/shrt-eMMC-NAND-adapters
Sockets / pinouts - https://multi-com.eu/shrt-eMMC-NAND-sockets

While we think that list of adapters will be static since cover 90% of chips used in Mobile Phones then list of sockets/pinouts will grows - soon new models ;)

Q: OK all clear... so will be there anything more ??
A: Yes....... UFS ;)

_________________
Best regards,
Boguslaw Rzepka,
Multi-COM Ltd., Poland


Top
 Profile  
 
 Post subject: Re: eMMC / eMCP NAND adapters without soldering - READY !
PostPosted: September 13th, 2018, 10:53 
Offline
User avatar

Joined: February 9th, 2009, 16:13
Posts: 2520
Location: Ontario, Canada
Wow! Great job!

_________________
Luke
Recovery Force Data Recovery


Top
 Profile  
 
 Post subject: Re: eMMC / eMCP NAND adapters without soldering - READY !
PostPosted: November 10th, 2018, 12:28 
Offline
User avatar

Joined: December 29th, 2016, 18:13
Posts: 140
Location: Poland
Hello guys,

At https://multi-recovery.com/models.php we updated list of supported ICs in case of eMMC/eMCP for each model available. Also addedd photos of new microSD, SD which was tested and working with our adapters ;)

_________________
Best regards,
Boguslaw Rzepka,
Multi-COM Ltd., Poland


Top
 Profile  
 
 Post subject: Re: eMMC / eMCP NAND adapters without soldering - READY !
PostPosted: November 18th, 2018, 9:19 
Offline
User avatar

Joined: December 29th, 2016, 18:13
Posts: 140
Location: Poland
Video test from using MR eMMC NAND adapters on:

- VNR
- VNR eMMC NAND
- FE / NR
- PC3000 Flash

Link: https://www.youtube.com/watch?v=lWsG9Dr4sKo&t=9s

Since some ask to get supported pinouts in one place we put it below:

MR NAND adapter for eMMC memory - MR TYPE 1 (Samsung BGA153)
- KMVTU000LM B503
- KMS5U000KM-B308
- KLM8G1GEAC-B001
- KLM4G1YEMD-B031
- KLM4G1FE3B-B001
- KLM8G2FE3B-B001
- KLMAG4FE4B-B002

MR NAND adapter for eMMC memory - MR TYPE 2 (Samsung BGA169)
- KLMAG4FEJA-A001
- KMV3U000LM-B304
- KLMCG8GE4A-A001
- KLM8G1WE4A-A001
- KLMAG4EEHM-B101

MR NAND adapter for eMMC memory - MR TYPE 3 (Samsung BGA153)
- KMVUS000LM-B304
- KMJJS000WM-B409
- KMSJS000KA-B308

MR NAND adapter for eMMC memory - MR TYPE 4 (Samsung BGA153)
- KMV3W000LM-B310

MR NAND adapter for eMMC memory - MR TYPE 5 (Samsung BGA153)
- KML5U000HM-B505
- KMJ5U000WA-B409

MR NAND adapter for eMMC memory - MR TYPE 6 (Hynix BGA221)
- H9TQ64ABJTMC
- H9TQ64A8GTMC-528Y
- H9TQ64A8GTMC-624Y
- H9TQ64AAETMC-710A
- H9TQ17ABJTMC-632A

MR NAND adapter for eMMC memory - MR TYPE 7 (Sandisk BGA153)
- SD5DH26A 4G
- SDIN7DU2-16G
- SDIN7DU2-8G
- SDIN7DP4-32
- SDIN8DE4-16G

MR NAND adapter for eMMC memory - MR TYPE 8 (Hynix BGA153)
- H26M52103FMR
- H9DP32A6AJAC
- H9DP32A4JJBC
- H26M31001HPR
- KE4BT4B6A
- H26M52002EQR
- H26M64003DQR

MR NAND adapter for eMMC memory - MR TYPE 9 (Samsung BGA221)
- KMQN1000SM-B316
- KMR310001M-B611
- KMQNW000SM-B316
- KMQ310013M-B316
- KMQN10006B-B318
- KMQ7X000SA-B315
- KMQ820013M-B419

MR NAND adapter for eMMC memory - MR TYPE 10 (Toshiba BGA153)
- THGBM5G5A1JBAIR
- THGBMFG8C4LBAIR
- THGBMBG7D2KBAIL
- THGBMBG8D4KBAIR

MR NAND adapter for eMMC memory - MR TYPE 11 (Toshiba BGA153/169)
- THGBMAG7A2JBAIR
- THGBM5G7B2JBAIM

MR NAND adapter for eMMC memory - MR TYPE 12 (Hynix BGA162)
- H9TP32A4GDBC
- H9TP32A8JDBC
- H9TP65A8JDMC

_________________
Best regards,
Boguslaw Rzepka,
Multi-COM Ltd., Poland


Top
 Profile  
 
 Post subject: Re: eMMC / eMCP NAND adapters without soldering - READY !
PostPosted: March 13th, 2019, 15:54 
Offline
User avatar

Joined: December 29th, 2016, 18:13
Posts: 140
Location: Poland
Small update to thread to not create new one.

New converters for our MR eMMC NAND adapters are ready which allows to use them on eMMC NAND Reconstructor addon (https://multi-com.eu/,details,id_pr,221 ... tools.html). As you know or not eMMC NAND addon uses DIFFRENT CUSTOM pinout from standard VNR. By this you require special converters which can change pinout of adapter to work with this addon. By using this converters you will be able to use eMMC NAND MR adapters on:

- VNR
- VNR eMMC NAND addon
- FE
- PC3K

Sample photo of adapter:
Image

Adapter after installation:
Image
Image

Video of conection process on diffrent eMMC - https://www.youtube.com/watch?v=ZNfELM3yRMs

_________________
Best regards,
Boguslaw Rzepka,
Multi-COM Ltd., Poland


Top
 Profile  
 
 Post subject: Re: eMMC / eMCP NAND adapters without soldering - READY !
PostPosted: May 13th, 2019, 12:52 
Offline
User avatar

Joined: December 29th, 2016, 18:13
Posts: 140
Location: Poland
Small update to thread to not create new one to our MR adapters which can works with:

- VNR
- VNR eMMC NAND (require converters - click for available models this https://multi-com.eu/,browse,id_gr,1945,key,converters-mr-emmc-nand-for-reconstructor,smenu,forensic_tools.html)
- FE
- PC3000 Flash v4 (available connections board for Standard addon, MultiBoard, Spider)
- Z3x NAND
- more connections boards for other NAND readers coming soon......

Monoliths News

NAND adapter for eMMC / eMCP memory - MR TYPE 13 (Micron BGA221)
Image

Supported models:
Image

NAND adapter for eMMC / eMCP memory - MR TYPE 14 (Hynix BGA162)

Image

Supported models:
Image


From new NAND pinouts for MR adapters:

Socket for eMMC NAND adapter - MR TYPE 7 PINOUT 2
Image Image

Socket for eMMC NAND adapter - MR TYPE 7 PINOUT 3
Image Image

Socket for eMMC NAND adapter - MR TYPE 7 PINOUT 4
Image Image

_________________
Best regards,
Boguslaw Rzepka,
Multi-COM Ltd., Poland


Top
 Profile  
 
 Post subject: Re: eMMC / eMCP NAND adapters without soldering - READY !
PostPosted: September 6th, 2019, 4:16 
Offline
User avatar

Joined: December 29th, 2016, 18:13
Posts: 140
Location: Poland
New adapter !!!! More cooming next week ;)

MR NAND adapter for eMMC / eMCP memory - MR TYPE 15 (Samsung BGA280) offers not only NAND technological access but also read over normal SD reader via SD protocol (watch https://youtu.be/N2iX-5qbIao)

Supported eMMC chip:
BGA280 found in Samsung Galaxy Alpha
Image

Adapter photo:
Image

Image

NAND pinout socket:
Image

Video from us of adapter - https://youtu.be/N2iX-5qbIao
Link to offer: https://multi-com.eu/shrt-uQZOFZG

_________________
Best regards,
Boguslaw Rzepka,
Multi-COM Ltd., Poland


Top
 Profile  
 
 Post subject: Re: eMMC / eMCP NAND adapters without soldering - READY !
PostPosted: January 9th, 2020, 11:24 
Offline
User avatar

Joined: December 29th, 2016, 18:13
Posts: 140
Location: Poland
NEW Socket for eMMC NAND adapter - MR TYPE 8 PINOUT 5 and 6 allows to support H26M42001FMR (two channels) eMMC chip using Type 8 adapter.

Product photos:
Image


Supported chips:
H26M42001FMR (two channels)
Image

Link: https://multi-com.eu/shrt-8Ua22HSQJ

_________________
Best regards,
Boguslaw Rzepka,
Multi-COM Ltd., Poland


Top
 Profile  
 
 Post subject: Re: eMMC / eMCP NAND adapters without soldering - READY !
PostPosted: February 24th, 2020, 11:04 
Offline
User avatar

Joined: December 29th, 2016, 18:13
Posts: 140
Location: Poland
NEW Socket for eMMC NAND adapter - MR TYPE 8 PINOUT 7 allows to support H26M42003GMRA, H26M42003GMR and H26M31001GMR eMMC chip using Type 8 adapter.

Adapter photo:
Image

Supported models:
- H26M42003GMRA
- H26M42003GMR
- H26M31001GMR

Link to shop: https://multi-com.eu/shrt-DNrRdfkvv

_________________
Best regards,
Boguslaw Rzepka,
Multi-COM Ltd., Poland


Top
 Profile  
 
 Post subject: Re: eMMC / eMCP NAND adapters without soldering - READY !
PostPosted: February 24th, 2020, 17:13 
Offline

Joined: March 20th, 2018, 7:55
Posts: 124
Location: Los Angeles
What does it connect to ... PC-3000 Flash ..?

did they post a price for it..?


Top
 Profile  
 
 Post subject: Re: eMMC / eMCP NAND adapters without soldering - READY !
PostPosted: February 24th, 2020, 17:17 
Offline
User avatar

Joined: June 11th, 2013, 17:01
Posts: 1710
Location: Phoenix, AZ USA
trumanhw wrote:
What does it connect to ... PC-3000 Flash ..?

did they post a price for it..?

Its all available via the link in the post.

_________________
HDD, SSD, Flash and RAID Data Recovery
Founder of The Data Recovery Professionals Group


Top
 Profile  
 
 Post subject: Re: eMMC / eMCP NAND adapters without soldering - READY !
PostPosted: March 11th, 2020, 10:31 
Offline
User avatar

Joined: December 29th, 2016, 18:13
Posts: 140
Location: Poland
New eMMC NAND Type 16 adapter allows to read SanDisk BGA162 over NAND !!!

Image

Supported Models:
SD7DP28C-4G
SD7DP28C-4G

Image

Image

Description: https://multi-recovery.com/subpages/MRTYPE16.php
Link to shop: https://multi-com.eu/shrt-EAClk4GtC

_________________
Best regards,
Boguslaw Rzepka,
Multi-COM Ltd., Poland


Top
 Profile  
 
 Post subject: Re: eMMC / eMCP NAND adapters without soldering - READY !
PostPosted: October 28th, 2020, 9:07 
Offline
User avatar

Joined: December 29th, 2016, 18:13
Posts: 140
Location: Poland
New MR NAND adapter for eMMC / eMCP memory - MR TYPE 17 (Toshiba BGA153)

Image
Image

Supported chip:

SD7DP28C-4G
SD7DP28C-8G

Image

Available pinouts at the moment for support SD7DP28C-4G and SD7DP28C-8G (more can be addedd by cheap sockets in futures)

Image


Description: https://multi-recovery.com/models.php
Link to shop: https://multi-com.eu/shrt-p7wO0bYRP

_________________
Best regards,
Boguslaw Rzepka,
Multi-COM Ltd., Poland


Top
 Profile  
 
 Post subject: Re: eMMC / eMCP NAND adapters without soldering - READY !
PostPosted: November 4th, 2020, 7:26 
Offline
User avatar

Joined: December 29th, 2016, 18:13
Posts: 140
Location: Poland
NEW !!! NEW !!! NEW !!!
MR BGA153 SDIN (Sandisk eMMC) NAND adapter

Photo:
Image

Supported Models:
Image
SDINADF4-⁠128G; ID: 45 48 9b a3 7e; 1x128GB
SDINBDA4-⁠128G; ID: 45 48 9a b3 7e; 1x128GB
SDINADB4-⁠64G; ID: 45 3e ab 92 7e; 1x64GB
SDIN9DW4-⁠64G; ID: 45 3c 96 93 7e; 2x32GB
SDIN9DW4-32G; ID: 45 3a 95 93 7a; 2x16GB
SDINADF4-⁠32G; ID: 45 3c 99 a3 7a; 1x32GB
SDINADS2-⁠32G; ID: 45 3c aa 92 7e; 1x32GB
SDIN9DS2-⁠16G; ID: 45 4c a9 92 7a; 1x16GB

More info: https://multi-recovery.com/subpages/MRBGA153SDIN.php
Link to shop: https://multi-com.eu/shrt-9VHSKy8xq

_________________
Best regards,
Boguslaw Rzepka,
Multi-COM Ltd., Poland


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 14 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 17 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group