All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 9 posts ] 
Author Message
 Post subject: Wanted donor for Kingston Data Traveler 100 G3 / 16GB
PostPosted: April 7th, 2021, 13:23 
Offline

Joined: July 7th, 2014, 6:44
Posts: 192
Location: Switzerland
Hi there,

We are looking for a donor for a Kingston Data Traveler 100 G3 16GB USB 3.0 flash drive but there are at leat two boards for this model, and the ones that are currently on the market do not match the donor we need. The board we need is more likely to be shared with past <= 16 GB variants of the flash drive, than with the current larger capacity models (e.g. 32GB).

The donor we need is visible in this video: https://www.youtube.com/watch?v=3TBiNadQKB0

The one wanted has a PHISON PS2251-07-V contoller ; not a SSS one.
The free NAND slot on the back face is labeled 2024570-001.B0.
(N.B. In our case, the NAND chip is a FT16B08UCH1-48.)

Have one for selling that you could send us to Switzerland in a bubble enveloppe ?
Please send your offer, or if any question reach us through our contact form: http://www.sosdonnees.ch/en/contact-form
Thank you!
Attachment:
File comment: Wanted board with Phison PS2251-07-V controller vs Not wanted with SSS controller.
Kingston_Data_Traveler-100-G3-16GB-wanted-with-Phison-controller-vs_not_wanted.jpg
Kingston_Data_Traveler-100-G3-16GB-wanted-with-Phison-controller-vs_not_wanted.jpg [ 154.37 KiB | Viewed 11060 times ]


Top
 Profile  
 
 Post subject: Re: Wanted donor for Kingston Data Traveler 100 G3 / 16GB
PostPosted: April 8th, 2021, 8:47 
Offline
User avatar

Joined: July 12th, 2010, 4:38
Posts: 1418
Location: Portugal
I got one for recovery today.
I will check how is inside!

_________________
http://www.pclab.com.pt facebook.com/PCLAB.A.T
ACELab partner


Top
 Profile  
 
 Post subject: Re: Wanted donor for Kingston Data Traveler 100 G3 / 16GB
PostPosted: April 8th, 2021, 8:54 
Offline

Joined: November 9th, 2006, 15:15
Posts: 2983
why not just chip off?


Top
 Profile  
 
 Post subject: Re: Wanted donor for Kingston Data Traveler 100 G3 / 16GB
PostPosted: April 8th, 2021, 12:44 
Offline

Joined: July 7th, 2014, 6:44
Posts: 192
Location: Switzerland
@pclab: Thanks. Fingers crossed!

@hddguy: Because the connector was bent and I could briefly see the files.
Replacing the connector didn't work because they were damages to the tracks and there are some tiny component at boring locations (opposite to the connector pins). Still good hope that using a donor being more cost effective than a chip off.
Chip off as a last resort.


Top
 Profile  
 
 Post subject: Re: Wanted donor for Kingston Data Traveler 100 G3 / 16GB
PostPosted: April 8th, 2021, 13:29 
Offline

Joined: January 8th, 2008, 5:21
Posts: 925
Location: uk
Quote:
Because the connector was bent and I could briefly see the files.


I wouldn't use a connector on the pcb. Don't forget you only need to attach 4 wires to gain usb2 access. Forget the usb3 connections! Of course if you still can't make it work then move on to the next stage.


Top
 Profile  
 
 Post subject: Re: Wanted donor for Kingston Data Traveler 100 G3 / 16GB
PostPosted: April 9th, 2021, 6:13 
Offline
User avatar

Joined: July 12th, 2010, 4:38
Posts: 1418
Location: Portugal
This is the one I have...


Attachments:
PXL_20210409_101149706.jpg
PXL_20210409_101149706.jpg [ 487.36 KiB | Viewed 10909 times ]

_________________
http://www.pclab.com.pt facebook.com/PCLAB.A.T
ACELab partner
Top
 Profile  
 
 Post subject: Re: Wanted donor for Kingston Data Traveler 100 G3 / 16GB
PostPosted: April 9th, 2021, 10:35 
Offline

Joined: July 7th, 2014, 6:44
Posts: 192
Location: Switzerland
@pclab: Thanks for the picture, but the one you have is USB 2.0 and seems 32GB from its chip.
Mine is a USB 3.0 and 16GB.
Attachment:
USB_flash_drive.jpg
USB_flash_drive.jpg [ 45.03 KiB | Viewed 10883 times ]


Top
 Profile  
 
 Post subject: Re: Wanted donor for Kingston Data Traveler 100 G3 / 16GB
PostPosted: April 9th, 2021, 14:35 
Offline

Joined: January 19th, 2017, 10:54
Posts: 22
Location: Poland
Could you post a good resolution photo of the device from both sides? Maybe the damaged tracks are easy to fix.


Top
 Profile  
 
 Post subject: Re: Wanted donor for Kingston Data Traveler 100 G3 / 16GB
PostPosted: April 10th, 2021, 4:47 
Offline

Joined: October 24th, 2009, 15:22
Posts: 872
Location: Poland
Same PCB - hi resolution.


Attachments:
forum.jpg
forum.jpg [ 1.44 MiB | Viewed 10814 times ]

_________________
Flash Killer - everyday new resources (pinout, XOR, ECC,config) for flash devices
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 9 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 11 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group