All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 9 posts ] 
Author Message
 Post subject: Apex tools:Improvements, revision, free tools and other news
PostPosted: July 4th, 2022, 11:04 
Offline

Joined: April 22nd, 2019, 11:39
Posts: 9
Location: Russia
Hi Everyone!

We are pleased to announce that over the past 3 months we have completely refined and improved all of our instruments based on the collected feedback from our customers over several years. This includes improving the shape, correcting the pin holes, and correcting the space between the heads. We have also strengthened the bending point of the instruments. We created a new measuring and testing technique. This allowed us to improve the accuracy of our instruments.

We found that some instruments had a flaw. For these instruments, we can do a free exchange. The following tools:
1. WF4 tool, old version had too wide between heads space - free exchange
2. PB5 and CH2 previous version backside was too long, it made difficulty work with connector - free exchange

All other tools of previous versions are absolutely operable, but if someone wants to improve it to the latest version, we can make a good discount.

In addition, we have to announce price increases for ramp instruments. Legally, we have relocated our company to Kazakhstan in order to retain the ability to accept payments through PayPal. This creates additional costs and fees for us. When we can get our price back, we are happy to do so.
We are keeping our price on e-type and c-type tools. https://apextoollab.com/price/

Also, we are starting to produce e-type tools using plastic. It will be x2 cheaper than aluminum version. Preorders are being accepted.

_________________
ApexToolLab.com - tools for data recovery specialists


Top
 Profile  
 
 Post subject: Re: Apex tools:Improvements, revision, free tools and other
PostPosted: July 4th, 2022, 12:56 
Offline
User avatar

Joined: September 16th, 2015, 9:06
Posts: 258
Location: Poland
Great to see you still in business working on new tools.

_________________
odzyskiwanie danych


Top
 Profile  
 
 Post subject: Re: Apex tools:Improvements, revision, free tools and other
PostPosted: August 8th, 2022, 11:44 
Offline

Joined: April 22nd, 2019, 11:39
Posts: 9
Location: Russia
ApexToolLab wrote:
For these instruments, we can do a free exchange. The following tools:
1. WF4 tool, old version had too wide between heads space - free exchange
2. PB5 and CH2 previous version backside was too long, it made difficulty work with connector - free exchange

It means you don’t need to ship to us the old version of tools. We provide new version free, we ask to pay for shipping only.

_________________
ApexToolLab.com - tools for data recovery specialists


Top
 Profile  
 
 Post subject: Re: Apex tools:Improvements, revision, free tools and other
PostPosted: August 8th, 2022, 12:15 
Offline

Joined: April 22nd, 2019, 11:39
Posts: 9
Location: Russia
We have some news:

New version of the platter holder with platters fixation.

Image

https://apextoollab.com/platters_holder ... er_2s.html



New head replacement tool for WD 3.5’’ Giant family.

Image



E-type tools from plastic are available.

https://apextoollab.com/head_unstick_plastic/

Image



For bulk orders we can make a discount and an extra bonus a personal engraving HDD clock:

Image Image



You can buy from us DATALABS socket adapters:

https://apextoollab.com/socket_adapters/

Image

_________________
ApexToolLab.com - tools for data recovery specialists


Top
 Profile  
 
 Post subject: Re: Apex tools:Improvements, revision, free tools and other
PostPosted: September 25th, 2022, 20:50 
Offline
User avatar

Joined: May 26th, 2011, 13:22
Posts: 76
Location: Philadelphia, PA
I was not offered a clock when I had purchased every tool you have? I'd like point out a flaw with your bench as you cannot access the head screw underneath on most drives. Also the old platter stands are too risky and can't be used. Are you offering an exchange on these as well? Thank you

_________________
Mr. Anderson
TriStateData.com


Top
 Profile  
 
 Post subject: Re: Apex tools:Improvements, revision, free tools and other
PostPosted: September 28th, 2022, 8:36 
Offline

Joined: April 22nd, 2019, 11:39
Posts: 9
Location: Russia
MrAndersons wrote:
I was not offered a clock when I had purchased every tool you have? I'd like point out a flaw with your bench as you cannot access the head screw underneath on most drives. Also the old platter stands are too risky and can't be used. Are you offering an exchange on these as well? Thank you

Hi Don!
When you bought all our tools, I didn't make a clock yet. And the price for tools was lower. But if you need the clock, we can discuss.
About 10 months ago we detected that windows of the workbench are too small for ST5000LM000(thank you, Luke) and made it widely enough (we didn’t change the photo on the site still). But we didn't have issues for most drive, only M11 family Seagate.
I should confess the first version of the platters stands had utterly bad design. So I can make a good discount for these items who have old versions (workbench and platter stands). And will try to find the way for free replacement of the first version of the platters stands.

_________________
ApexToolLab.com - tools for data recovery specialists


Top
 Profile  
 
 Post subject: Re: Apex tools:Improvements, revision, free tools and other
PostPosted: September 28th, 2022, 15:15 
Offline
User avatar

Joined: February 9th, 2009, 16:13
Posts: 2520
Location: Ontario, Canada
MrAndersons wrote:
I was not offered a clock when I had purchased every tool you have? I'd like point out a flaw with your bench as you cannot access the head screw underneath on most drives. Also the old platter stands are too risky and can't be used. Are you offering an exchange on these as well? Thank you

Why didn't you reach out to him directly, rather than complain about things here? As soon as I discovered the flaw with the window size underneath, I let him know and he had it corrected almost instantly and sent me a replacement right away.

While it would be nice to get a discount on the redesigned platter stand, I'd never expect a free replacement as the old stand worked as advertised, even if it wasn't the best design. And, considering how hard it is for Andrey to get paid by anyone outside of Russia, I think he deserves some credit for persevering and not just throwing in the towel.

_________________
Luke
Recovery Force Data Recovery


Top
 Profile  
 
 Post subject: Re: Apex tools:Improvements, revision, free tools and other
PostPosted: September 29th, 2022, 12:58 
Offline
User avatar

Joined: May 26th, 2011, 13:22
Posts: 76
Location: Philadelphia, PA
lcoughey wrote:
MrAndersons wrote:
I was not offered a clock when I had purchased every tool you have? I'd like point out a flaw with your bench as you cannot access the head screw underneath on most drives. Also the old platter stands are too risky and can't be used. Are you offering an exchange on these as well? Thank you

Why didn't you reach out to him directly, rather than complain about things here? As soon as I discovered the flaw with the window size underneath, I let him know and he had it corrected almost instantly and sent me a replacement right away.
I don't remember talking to you pal. Don't you have a new club to learn from? I'm sorry to hear about your father...

Anyway, I saw this post about defects and thought I'd add my observation since it wasn't mentioned.
I give you much credit Andrey regarding your platter extractor. It is a game changing tool for sure which I use often.
I don't expect anything for free by the way, maybe a more well designed tool (regarding the platter stands) before they were offered publicly for sale.

_________________
Mr. Anderson
TriStateData.com


Top
 Profile  
 
 Post subject: Re: Apex tools:Improvements, revision, free tools and other
PostPosted: April 9th, 2023, 5:00 
Offline

Joined: April 22nd, 2019, 11:39
Posts: 9
Location: Russia
Dear Colleagues! We've released a couple new tools:

Head replacement tool for WD VeniceR family https://apextoollab.com/head-replacemen ... 5/wv3.html
Image

Head unstick tool for WD Charger family https://apextoollab.com/unstick_slim/wd_charger2_e.html
Image

Platters washing machine is coming soon.
Image


Note for clients from the EU: we can ship small orders from Riga, Latvia(2-3 times per month)

_________________
ApexToolLab.com - tools for data recovery specialists


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 9 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 13 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group