Main » Forums home » Market

All times are UTC - 5 hours [ DST ]



Post new topic Reply to topic  Page 1 of 1
  [ 5 posts ] 
  Print view Previous topic | Next topic 
Author Message
neoborn
 Post subject: Seagate ST3120023AS - 9W2813-301 - Need PCB
PostPosted: March 18th, 2008, 13:32 
Offline

Joined: March 18th, 2008, 11:20
Posts: 10
I have a

Seagate 7200.7 120GB SATA
Model: ST3120023AS
P/N: 9W2813-301
Site Code: AMK
Firmware: 3.05
Need PCB and advice.

Thanks in advance
Top
 Profile  
 
rameez
 Post subject: Re: Seagate ST3120023AS - 9W2813-301 - Need PCB
PostPosted: March 19th, 2008, 15:12 
Offline

Joined: June 27th, 2006, 11:33
Posts: 2287
Location: In ur HDD !
I have the pcb PM me for further info . Also tell me your location in pm
Top
 Profile  
 
martcom
 Post subject: Re: Seagate ST3120023AS - 9W2813-301 - Need PCB
PostPosted: April 2nd, 2008, 12:32 
Offline

Joined: December 18th, 2006, 9:55
Posts: 38
Location: UK
Hello

We have used parts and pcb boards for hard drives mail for parts

If we have i will try to help with parts

chester@martcom.com

_________________
Hard drives from 10Mb to 2Tb MFM/RLL/SCSI/IDE/SATA/PATA/SAS

DRIVES / PCB / BOARDS
Top
 Profile  
 
neoborn
 Post subject: Re: Seagate ST3120023AS - 9W2813-301 - Need PCB
PostPosted: April 10th, 2008, 20:11 
Offline

Joined: March 18th, 2008, 11:20
Posts: 10
Anyone?

neoborn wrote:
rameez wrote:
HDA is the part without the PCB . There is one way u can check the motor if u have a multimeter switch it to diode mode and check on the 1 and second pin and 2 and 3 pin there values should be .2 ohms .
If not then motor is bad no need for the PCB . else PCB is faulty replacing it will solve ur problem .


Are you saying to check P1 & P2, then P2 & P3 and it should read 2 ohms? I did test those on that setting and it read 0.07 on the 2000 or 20k setting
Image

Image
Top
 Profile  
 
rameez
 Post subject: Re: Seagate ST3120023AS - 9W2813-301 - Need PCB
PostPosted: April 15th, 2008, 14:42 
Offline

Joined: June 27th, 2006, 11:33
Posts: 2287
Location: In ur HDD !
The pins are on the motor .
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 5 posts ] 

Main » Forums home » Market

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 24 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Switch to mobile style
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group