Maxtor Calypso DiamondMax Plus 9 safe mode

[Real_Jose_Pinto]

Does anyone know how to set Maxtor Calypso DiamondMax Plus 9 SATA safe mode? I got IDE diagram for safe mode but not SATA

Thanks

[Real_Jose_Pinto]

Here is the hdd

Attachments

[wawalab]

hi Real_Jose_Pinto, the easy motherd is replace one IDE PCB, like pcba_pn lable is R5FYA.
wawalab
good luck

[pcimage]

Like Starling said in another post....

It does work!

[TerraNova]

It does work for sabre not calypso

[pcimage]

It does, I just tried it with a 6Y160M0

msn me for details

[TerraNova]

I could not get it working, i did set jumper as shown by Starling but the motor still spins.

[pcimage]

Hmm, that's strange. I just tried it again. Works fine.

Electronic "noise" comes from the PCB, but motor does not start, for me.

Load loader (takes up to 1 minute), then motor starts and all OK.

Check the pins again, I see your pic is upside down from Starlings drawing.

[rameez]

i have tried replacing the sata pcb with ide pcb both having same processor chip works good for me .

[Amarbir[CDR-Labs]]

Hi Mates,
You people have so many Maxtors in your country.We Poor Mortals Have Very Very Less Maxtors .

[saintvice]

@Real_jose_pinto...can you give me diagram for calypso diamondmax 9 IDE safe mode? or point me to someplace i can find it. thanks in advance.