All times are UTC - 5 hours [ DST ]


Forum rules


No new topics are allowed in this forum. Please use other forums to create topics.



Post new topic Reply to topic  [ 11 posts ] 
Author Message
 Post subject: Maxtor Calypso DiamondMax Plus 9 safe mode
PostPosted: August 6th, 2007, 3:07 
Offline

Joined: October 1st, 2006, 6:29
Posts: 107
Does anyone know how to set Maxtor Calypso DiamondMax Plus 9 SATA safe mode? I got IDE diagram for safe mode but not SATA

Thanks


Top
 Profile  
 
 Post subject: Re: Maxtor Calypso DiamondMax Plus 9 safe mode
PostPosted: August 7th, 2007, 23:40 
Offline

Joined: October 1st, 2006, 6:29
Posts: 107
Here is the hdd


Attachments:
maxtorsata.jpg
maxtorsata.jpg [ 102.1 KiB | Viewed 9815 times ]
Top
 Profile  
 
 Post subject: Re: Maxtor Calypso DiamondMax Plus 9 safe mode
PostPosted: August 8th, 2007, 9:55 
Offline

Joined: May 1st, 2005, 10:12
Posts: 94
hi Real_Jose_Pinto, the easy motherd is replace one IDE PCB, like pcba_pn lable is R5FYA. :wink:
wawalab
good luck


Top
 Profile  
 
 Post subject: Re: Maxtor Calypso DiamondMax Plus 9 safe mode
PostPosted: August 8th, 2007, 11:15 
Offline

Joined: November 29th, 2006, 10:08
Posts: 6829
Location: UK
Like Starling said in another post....
Attachment:
SATAsafe.jpg
SATAsafe.jpg [ 23.14 KiB | Viewed 9846 times ]


It does work!

_________________
PC Image Data Recovery
www.pcimage.co.uk


Top
 Profile  
 
 Post subject: Re: Maxtor Calypso DiamondMax Plus 9 safe mode
PostPosted: August 8th, 2007, 11:30 
Offline

Joined: August 8th, 2007, 6:32
Posts: 1165
Location: inside ROM
It does work for sabre not calypso :D


Top
 Profile  
 
 Post subject: Re: Maxtor Calypso DiamondMax Plus 9 safe mode
PostPosted: August 8th, 2007, 11:52 
Offline

Joined: November 29th, 2006, 10:08
Posts: 6829
Location: UK
It does, I just tried it with a 6Y160M0 :-)

msn me for details ;-)

_________________
PC Image Data Recovery
www.pcimage.co.uk


Top
 Profile  
 
 Post subject: Re: Maxtor Calypso DiamondMax Plus 9 safe mode
PostPosted: August 8th, 2007, 20:48 
Offline

Joined: August 8th, 2007, 6:32
Posts: 1165
Location: inside ROM
I could not get it working, i did set jumper as shown by Starling but the motor still spins.


Top
 Profile  
 
 Post subject: Re: Maxtor Calypso DiamondMax Plus 9 safe mode
PostPosted: August 9th, 2007, 5:33 
Offline

Joined: November 29th, 2006, 10:08
Posts: 6829
Location: UK
Hmm, that's strange. I just tried it again. Works fine.

Electronic "noise" comes from the PCB, but motor does not start, for me.

Load loader (takes up to 1 minute), then motor starts and all OK.

Check the pins again, I see your pic is upside down from Starlings drawing.

_________________
PC Image Data Recovery
www.pcimage.co.uk


Top
 Profile  
 
 Post subject: Re: Maxtor Calypso DiamondMax Plus 9 safe mode
PostPosted: August 9th, 2007, 12:51 
Offline

Joined: June 27th, 2006, 11:33
Posts: 2310
Location: In ur HDD !
i have tried replacing the sata pcb with ide pcb both having same processor chip works good for me .


Top
 Profile  
 
 Post subject: Re: Maxtor Calypso DiamondMax Plus 9 safe mode
PostPosted: August 11th, 2007, 15:14 
Offline
User avatar

Joined: August 15th, 2006, 3:01
Posts: 2267
Location: CDRLabs @ Chandigarh [ India ]
Hi Mates,
You people have so many Maxtors in your country.We Poor Mortals Have Very Very Less Maxtors .

_________________
Regards
Amarbir S Dhillon
CDRLabs Data Recovery - [ Chandigarh ,India ]
My Data Recovery Experiments - > https://www.facebook.com/chandigarhdatarecovery


Top
 Profile  
 
 Post subject: Re: Maxtor Calypso DiamondMax Plus 9 safe mode
PostPosted: June 28th, 2009, 20:09 
Offline

Joined: March 26th, 2009, 18:26
Posts: 20
Location: ghana
@Real_jose_pinto...can you give me diagram for calypso diamondmax 9 IDE safe mode? or point me to someplace i can find it. thanks in advance.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 11 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group