| HDD GURU FORUMS http://forum.hddguru.com/ |
|
| Translation to other languages http://forum.hddguru.com/viewtopic.php?f=19&t=14451 |
Page 1 of 1 |
| Author: | poehere [ January 8th, 2010, 11:51 ] |
| Post subject: | Translation to other languages |
Is it going to be possible for anyone who speaks and reads another language to find information on this tool in their native language? I know this is a major concern for all who do not a full understand of the English language and it is nice to be able to have a way to check on the functions in their native language. Most or should I say all DR tools only come with the manuals, websites or any documentation in the English language. Sometime the translation are not so easy to understand and knowing the problems to translate from English to French is a very difficult job. But it would be nice to have a manual in the French language just to check on in case there is some area in the English manual that are not clear to read. It would also be nice to see a translation on the website in the French language so that it makes it easier to read and understand. Thank you for considering this request. |
|
| Author: | falther [ January 8th, 2010, 14:12 ] |
| Post subject: | Re: Translation to other languages |
So far it concerns the new european homepage http://www.atola-europe.com we try to set it up in several languages. The structure is ready and all pages are set up. Logically the first language which is ready is English and German is close to be complete. Italian, French and Spanish will follow - and where the translation is not yet done, we still use the english text - which will be replaced step by step. Everybody is very wellcome to give us advice for a correct translation of parts or technical expressions, where we dont use the right word or the right definition. +++ |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|