All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 5 posts ] 
Author Message
 Post subject: New release: Atola Bandura 1.1.5
PostPosted: November 29th, 2011, 7:41 
Offline
User avatar

Joined: June 15th, 2009, 5:18
Posts: 51
Dear Atola Bandura owners,

I am glad to inform about the latest release of Bandura firmware. Apart from bugfixes, it contains 5 new features:

  • Checksum calculation for Source & Target disks in the same time
  • Automatic bad sectors repair function (for so-called "soft bad sectors")
  • HPA / DCO max address management
  • Erasing: Option to erase Source & Target disks simultaneously
  • Imaging: Setting to enable Read Long usage for bad sectors on a last pass


Detailed Bandura changelog and firmware download link can be found here: Atola Bandura Firmware Update

_________________
Vitaliy Mokosiy
CTO, Atola Technology


Top
 Profile  
 
 Post subject: Re: New release: Atola Bandura 1.1.5
PostPosted: December 1st, 2011, 13:35 
Offline

Joined: April 5th, 2010, 23:02
Posts: 89
Location: Winder, GA
Just wanted to chime in here and say how pleased I am with the new update especially. It's just been a few days but this has addressed practically every issue I was having a problem with. The bad sector repair is wonderful and the bug fixes to the "data only" imaging has just moved this in front my my Ninja Kaze unit.

The read-long option alone just made my deepspar a little nervous :)


Top
 Profile  
 
 Post subject: Re: New release: Atola Bandura 1.1.5
PostPosted: December 1st, 2011, 15:18 
Offline
User avatar

Joined: July 21st, 2010, 5:03
Posts: 247
Location: Norfolk, UK
All we need now guys is imaging to a network drive, I know this is a difficult one given the user interface, but the hardware is already there. This coupled with the recent FW update would make this an awesome imager... :D

_________________
East Anglian Data Recovery Services
http://www.eadr.co.uk

"If it's your only copy - then it's not a backup!"


Top
 Profile  
 
 Post subject: Re: New release: Atola Bandura 1.1.5
PostPosted: December 2nd, 2011, 11:37 
Offline
User avatar

Joined: July 16th, 2008, 17:52
Posts: 489
Location: Long Beach, California
The Atola Imager (not Bandura) is capable of network imaging, so I can see how it may very well be possible.


Top
 Profile  
 
 Post subject: Re: New release: Atola Bandura 1.1.5
PostPosted: December 8th, 2011, 10:32 
Offline
User avatar

Joined: September 2nd, 2008, 12:14
Posts: 446
Location: Austria / Europe
there is no doubt ... I am pro Atola ... but

there is no doubt too, that I am one of the intense users
of these tools and just finished a test:

One of the new features of the Atola Bandura is the
erasing of either one (target) or both (source + target) hdd.

All other tools I know up to this test, run only drives with
the same size, slow down speed with each hdd added and
use the maximum speed of the slowest hdd for both drives
connected.

***

The outstanding feature of Atola Bandura is that drives are
erased parallel + each drive is handled in its own maximum
speed, besides the fact that the 2 drives dont have to be the
same size.

Guys, this product is hot, hot, hot - call Santa Claus !!!

+++


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 5 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 5 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group