All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 5 posts ] 
Author Message
 Post subject: Atola Insight Forensic 4.0
PostPosted: May 9th, 2014, 6:15 
Offline
User avatar

Joined: June 15th, 2009, 5:18
Posts: 51
Pre-ordering period is over. Now sales of Atola Insight Forensic are officially started.

Key features of Atola Insight Forensic:
  • New small and powerful DiskSense unit with 9 ports (4xSATA 3.0, 4xUSB 3.0, 1xIDE). See the technical specification.
  • Extremely fast imaging and other operations with speeds of up to 450 MB/s. See the benchmark of Atola Insight Forensic.
  • Support of USB hard drives and any USB flash devices. USB card reader support.
  • Ability to run multiple concurrent tasks over different hard drives, images, USB devices.
  • Imaging to multiple targets.
  • Secondary Ethernet port for remote SSH access.


Attachments:
File comment: New DiskSense unit. Exclusively for Atola Insight Forensic
unit1.jpg
unit1.jpg [ 134.33 KiB | Viewed 31092 times ]
File comment: Back side of new DiskSense unit
unit2.jpg
unit2.jpg [ 143.48 KiB | Viewed 31092 times ]
File comment: Multi-tasking in action. Here you see:
- Source hard drive (WD) is being imaged onto 2 targets: Seagate (SATA Target 1 port) and another Seagate (USB 3.0 Target 2 port)
- At the same time, another WD drive is being scanned for defects (SATA Target 3 port).
- A hash is being calculated for a Seagate drive that is attached directly to the PC.

multiple-ports-progress1.png
multiple-ports-progress1.png [ 54.79 KiB | Viewed 31092 times ]
File comment: Imaging drives with 390 MB/s speed
imaging-speed.png
imaging-speed.png [ 40.69 KiB | Viewed 31092 times ]
File comment: Imaging. File signatures and HEX viewer in action
imaging-file-signatures.png
imaging-file-signatures.png [ 78.8 KiB | Viewed 31092 times ]
File comment: Imaging report. USB drive as a target attached directly to DiskSense unit
imaging-report.png
imaging-report.png [ 58.33 KiB | Viewed 31092 times ]
File comment: Home screen with multiple ports
home-with-toshiba.png
home-with-toshiba.png [ 73.46 KiB | Viewed 31092 times ]
File comment: Automatic checkup (head speed graphs)
automatic-checkup-media-surface.png
automatic-checkup-media-surface.png [ 86.32 KiB | Viewed 31092 times ]
File comment: File list creation in File Recovery
file-recovery-list.png
file-recovery-list.png [ 79.63 KiB | Viewed 31092 times ]
File comment: File recovery integrated with Imaging (Imaging map used to show Copied column values)
file-recovery-copied.png
file-recovery-copied.png [ 93.45 KiB | Viewed 31092 times ]

_________________
Vitaliy Mokosiy
CTO, Atola Technology
Top
 Profile  
 
 Post subject: Re: Atola Insight Forensic 4.0
PostPosted: May 11th, 2014, 8:43 
Offline
User avatar

Joined: February 13th, 2014, 12:13
Posts: 166
Location: Isfahan
Hi Vitaliy,

More details about Network Forensic, please

_________________
Phoenix Computer Forensic Laboratory
http://www.databack.ir


Top
 Profile  
 
 Post subject: Re: Atola Insight Forensic 4.0
PostPosted: May 11th, 2014, 19:04 
Offline

Joined: September 27th, 2005, 8:21
Posts: 765
databack
There's a separate GigE port on the hardware unit which allows you to log in as root & install any network forensics tools directly onto unit. This is basically a "convenience" feature.

_________________
Dmitry


Top
 Profile  
 
 Post subject: Re: Atola Insight Forensic 4.0
PostPosted: October 2nd, 2014, 4:18 
Offline

Joined: October 2nd, 2014, 3:46
Posts: 1
Location: Romania
Hello Vitaliy,
How much does this cost?
Are they offering also service for recovery data?

I have an external HDD with bad sectors and any other recovery software said that "sectors cannot be read" :(

Thanks.


Top
 Profile  
 
 Post subject: Re: Atola Insight Forensic 4.0
PostPosted: October 4th, 2014, 0:39 
Offline
User avatar

Joined: June 15th, 2009, 5:18
Posts: 51
cristi-hpt wrote:
Hello Vitaliy,
How much does this cost?
Are they offering also service for recovery data?

I have an external HDD with bad sectors and any other recovery software said that "sectors cannot be read" :(

Thanks.


We do not offer recovery services at this time. Please contact us for pricing options: http://atola.com/company/contact.html

_________________
Vitaliy Mokosiy
CTO, Atola Technology


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 5 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 6 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group