Switch to full style
Discussions related to Atola Insight data recovery/Forensic suite, Atola Bandura standalone imager
Post a reply

Port 2 fails to read/write

August 12th, 2016, 15:16

I have two atolas and for some reason both units port 2 fails to r/w, what could it cause this?

Re: Port 2 fails to read/write

August 13th, 2016, 1:50

What DiskSense units do you have?

What Atola Insight version is in use at your PC?

Re: Port 2 fails to read/write

August 15th, 2016, 9:05

We have V4.4.5809.30644

Re: Port 2 fails to read/write

August 15th, 2016, 9:33

hdd_sand wrote:We have V4.4.5809.30644


OK, now it is clear. The problem caused the error was already fixed in Atola Insight Forensic 4.5. You may download it if you have an active subscription: http://atola.com/products/insight/download.html

In case if you need to renew subscription, please visit this page: http://atola.com/products/insight/subscriptions/

Re: Port 2 fails to read/write

August 15th, 2016, 14:12

What made Port 2 stop working? the 4.4 update?

Re: Port 2 fails to read/write

August 16th, 2016, 5:11

Yes, speed improvements in 4.4. However, the problem is not that critical as it would seem at first sight. It is only 'Fill or Erase' function that fails for Port 2. Imaging to Port 2 properly works in 4.4.
Post a reply