Great answer!
| Attachments: |
|
l.JPG [ 16.92 KiB | Viewed 23471 times ] |
| HDD GURU FORUMS http://forum.hddguru.com/ |
|
| Cloning to IDE http://forum.hddguru.com/viewtopic.php?f=19&t=34480 |
Page 1 of 1 |
| Author: | hdd_sand [ November 7th, 2016, 17:47 ] |
| Post subject: | Cloning to IDE |
I have made a clone to an IMG file now I need to clone that IMG to a new IDE, how can I accomplish this? I do not have a IDE port on the MOBO |
|
| Author: | lcoughey [ November 7th, 2016, 17:49 ] |
| Post subject: | Re: Cloning to IDE |
1. buy a mother board with IDE 2. install a PCI IDE controller 3. use an IDE USB enclosure |
|
| Author: | hdd_sand [ November 7th, 2016, 18:27 ] | ||
| Post subject: | Re: Cloning to IDE | ||
Great answer!
|
|||
| Author: | dick [ November 7th, 2016, 18:44 ] |
| Post subject: | Re: Cloning to IDE |
Use a sata to ide adapter. Or if you don't have one of those then try using your paranormal power addon. 
|
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|