| HDD GURU FORUMS http://forum.hddguru.com/ |
|
| ST31500341AS 7200.11 few click and stop spinning ready http://forum.hddguru.com/viewtopic.php?f=20&t=25894 |
Page 1 of 1 |
| Author: | chamxz [ May 1st, 2013, 0:28 ] | ||
| Post subject: | ST31500341AS 7200.11 few click and stop spinning ready | ||
hi everybody I have this case Barracuda 7200.11 ST31500341AS when connected to HDD doctor and power on it make a few clicks and stop spinning and wrongly show ready status also wrong Model, firmware and LBA see Picture and in terminal mode I cannot access any command I short the pcb with tweezers but nothing maybe some buddy has change PCB or ROM Chip? any suggestion ?? thanks
|
|||
| Author: | pcimage [ May 1st, 2013, 2:37 ] |
| Post subject: | Re: ST31500341AS 7200.11 few click and stop spinning ready |
Bad heads |
|
| Author: | chamxz [ May 4th, 2013, 1:25 ] |
| Post subject: | Re: ST31500341AS 7200.11 few click and stop spinning ready |
Spildit wrote: + 1 for Bad heads. At any rate i think that it should output terminal LOG if PCB/ROM were ok ... I well swap heads and tell you what happing thx |
|
| Author: | pcimage [ May 6th, 2013, 2:48 ] |
| Post subject: | Re: ST31500341AS 7200.11 few click and stop spinning ready |
Good luck! |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|