HDD GURU FORUMS
http://forum.hddguru.com/

seagate 7200.12
http://forum.hddguru.com/viewtopic.php?f=20&t=26111		 Page 1 of 1
Author:  y0k090 [ May 28th, 2013, 23:42 ]
Post subject:  seagate 7200.12
Hi
Quote:
Rst 0x08M
No HOST FIS-ReadyStatusFlags 2002B001
ASCII Diag mode

F3 T>/2

F3 2>Z

HighPowerMode
Spin Down Complete
Elapsed Time 0.102 msecs
F3 2>U

HighPowerMode

ExecuteSpinRequest

Spin Up Complete
Elapsed Time 3.763 secs
F3 2>/t

F3 T>m0,2,2,,,,,22

RW subfile error 201F
RW subfile error 201F
SIM Error 201F
DiagError 0000500E Process Defect List Error
R/W Sense 00000002, R/W Error 841C0087, List Offset 00000000, List Index 0025633B, File Error 000000D0

F3 T>

please, how to fix
thanks
Author:  hddguy [ May 29th, 2013, 8:39 ]
Post subject:  Re: seagate 7200.12
Quote:
F3 T>/2

F3 2>Z

HighPowerMode
Spin Down Complete
Elapsed Time 0.102 msecs
F3 2>U

HighPowerMode

ExecuteSpinRequest

Spin Up Complete


Why do you do this?


Quote:
F3 T>m0,2,2,,,,,22


And why do you instantly run this command without checking the presence of of complications like non resident list?

If this is a clients disk, I suggest you send to a professional.
Author:  northwind [ May 29th, 2013, 9:50 ]
Post subject:  Re: seagate 7200.12
Another 7200.11 tutorial followed blindly for a 7200.12 ... :(
Author:  y0k090 [ May 29th, 2013, 11:10 ]
Post subject:  Re: seagate 7200.12
hddguy wrote:
Quote:
F3 T>/2

F3 2>Z

HighPowerMode
Spin Down Complete
Elapsed Time 0.102 msecs
F3 2>U

HighPowerMode

ExecuteSpinRequest

Spin Up Complete


Why do you do this?


Quote:
F3 T>m0,2,2,,,,,22


And why do you instantly run this command without checking the presence of of complications like non resident list?

If this is a clients disk, I suggest you send to a professional.

I am using seagate HD doctor.
I want to repair, do not need data.
I can not check any public list.
I can not load from HDD
Author:  y0k090 [ May 29th, 2013, 11:15 ]
Post subject:  Re: seagate 7200.12
northwind wrote:
Another 7200.11 tutorial followed blindly for a 7200.12 ... :(

What is the command used to 7200.12
any signal you can give. I think it will get the error.
Author:  hddguy [ May 29th, 2013, 11:57 ]
Post subject:  Re: seagate 7200.12
y0k090 wrote:
do not need data.


Why would you want to repair? chances are its under warranty, RMA it.
Author:  y0k090 [ May 29th, 2013, 21:22 ]
Post subject:  Re: seagate 7200.12
hddguy wrote:
y0k090 wrote:
do not need data.


Why would you want to repair? chances are its under warranty, RMA it.

I need to fix it.
I have followed the statements Salvationdata forum, but no success.
Author:  BlackST [ May 30th, 2013, 4:52 ]
Post subject:  Re: seagate 7200.12
RW subfile error 201F
RW subfile error 201F
SIM Error 201F
DiagError 0000500E Process Defect List Error
R/W Sense 00000002, R/W Error 841C0087, List Offset 00000000, List Index 0025633B, File Error 000000D0

It is "something more" than usual problems , "internet fix" doesn't work in this state and also, in my opinion, is dangerous for data. Does SA read ?
Author:  hddguy [ May 30th, 2013, 5:06 ]
Post subject:  Re: seagate 7200.12
The translator command was run instantly after spinup, this will never work and always produce error.
Author:  y0k090 [ May 30th, 2013, 5:36 ]
Post subject:  Re: seagate 7200.12
hddguy wrote:
The translator command was run instantly after spinup, this will never work and always produce error.

This command is always used for the following cases:
Quote:
Rst 0x08M
No HOST FIS-ReadyStatusFlags 2002B001

why it can not be used in this case.
70% success when using this command.
the problem is there any other way, I was trying to test the command.
results are not as expected.
Author:  y0k090 [ May 30th, 2013, 5:38 ]
Post subject:  Re: seagate 7200.12
BlackST wrote:
It is "something more" than usual problems , "internet fix" doesn't work in this state and also, in my opinion, is dangerous for data. Does SA read ?

if the bad sectors in SA, how to fix, or no solution.
Salvation is often said by the SA, but they can not provide a solution.
Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/