All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 10 posts ] 
Author Message
 Post subject: error loading hdd
PostPosted: June 19th, 2013, 16:08 
Offline

Joined: June 13th, 2013, 5:58
Posts: 52
Location: french
Hello
I connect a WD5000bevt drive an the HD shows busy and after that shows Err
How to repair please
Thx


Attachments:
WD5000BEVT.JPG
WD5000BEVT.JPG [ 100.05 KiB | Viewed 14870 times ]
Top
 Profile  
 
 Post subject: Re: error loading hdd
PostPosted: June 19th, 2013, 16:16 
Offline

Joined: June 13th, 2013, 5:58
Posts: 52
Location: french
the status is ready and when i want to load hdd Hd doctor shows the error
help please


Top
 Profile  
 
 Post subject: Re: error loading hdd
PostPosted: June 19th, 2013, 22:47 
Offline

Joined: August 18th, 2010, 17:35
Posts: 3636
Location: Massachusetts, USA
Seems like firmware is not read for some reason.
Can you describe the drive's physical behavior after power on?

_________________
Hard Disk Drive, SSD, USB Drive and RAID Data Recovery Specialist in Massachusetts


Top
 Profile  
 
 Post subject: Re: error loading hdd
PostPosted: June 20th, 2013, 4:30 
Offline

Joined: November 9th, 2006, 15:15
Posts: 2983
Probably you will find that spindle is stopped, and is a physical issue.


Top
 Profile  
 
 Post subject: Re: error loading hdd
PostPosted: June 20th, 2013, 4:43 
Offline

Joined: June 13th, 2013, 5:58
Posts: 52
Location: french
the drive spin well and there is no strange sound
thx


Top
 Profile  
 
 Post subject: Re: error loading hdd
PostPosted: June 20th, 2013, 6:52 
Offline

Joined: August 18th, 2010, 17:35
Posts: 3636
Location: Massachusetts, USA
Let's eliminate the obvious: PCB is native?

_________________
Hard Disk Drive, SSD, USB Drive and RAID Data Recovery Specialist in Massachusetts


Top
 Profile  
 
 Post subject: Re: error loading hdd
PostPosted: June 20th, 2013, 15:57 
Offline

Joined: June 13th, 2013, 5:58
Posts: 52
Location: french
yes pcb is native thx for helping


Top
 Profile  
 
 Post subject: Re: error loading hdd
PostPosted: June 23rd, 2013, 16:04 
Offline

Joined: March 11th, 2008, 4:35
Posts: 1050
Location: Bangladesh
did you try to load in LOW SPEED when it's REAYD?

_________________
__________
There is no substitute for education and experience
THANK YOU
SHAHI
shahi.mahbub@gmail.com


Top
 Profile  
 
 Post subject: Re: error loading hdd
PostPosted: June 27th, 2013, 18:02 
Offline

Joined: June 13th, 2013, 5:58
Posts: 52
Location: french
no mods readed
i also try to load by low speed
thx


Top
 Profile  
 
 Post subject: Re: error loading hdd
PostPosted: October 1st, 2013, 12:52 
Offline

Joined: July 22nd, 2013, 13:04
Posts: 71
Location: US
Spildit wrote:
If you need the data from the drive you can try Hot Swap and see if you can gain access to SA that way .... If not Heads/Pre-Amp might be damaged.
If you can gain access to SA by hot swap you can then copy the defect lists and translator to the donnor drive and do a smart hot swap to get data back.


Actually i had a WD MY BOOK that freezes reading the plist and i cannot acces the data also because of the damage and the drive cannot be detected without the usb controller board from WD. Can i do something about it doing that?


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 10 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 5 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group