Thanks for your response.
Yes, the drive is still spinning after it becomes ready.
The PCB is the original.
Thanks again
| Attachments: |
|
IMG_0520.JPG [ 1.65 MiB | Viewed 12866 times ] |
| HDD GURU FORUMS http://forum.hddguru.com/ |
|
| wd1600aajs-75b4a0 http://forum.hddguru.com/viewtopic.php?f=20&t=26352 |
Page 1 of 1 |
| Author: | rsh [ July 5th, 2013, 21:37 ] |
| Post subject: | wd1600aajs-75b4a0 |
Need mods and res Version 5007 Becomes ready but wont detect. Thanks |
|
| Author: | rsh [ July 6th, 2013, 12:01 ] | ||
| Post subject: | Re: wd1600aajs-75b4a0 | ||
Thanks for your response. Yes, the drive is still spinning after it becomes ready. The PCB is the original. Thanks again
|
|||
| Author: | rsh [ July 6th, 2013, 16:15 ] |
| Post subject: | Re: wd1600aajs-75b4a0 |
Not in the office anymore. Drive just gives ROM FW version. Busy for a few seconds and then back to ready. No ID |
|
| Author: | rsh [ July 7th, 2013, 13:24 ] |
| Post subject: | Re: wd1600aajs-75b4a0 |
Thanks I will let you know how it turns out |
|
| Author: | rsh [ July 9th, 2013, 14:15 ] |
| Post subject: | Re: wd1600aajs-75b4a0 |
I was able to load from file. Then load ATA mod. Imaging now. Thanks for your help |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|