All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 9 posts ] 
Author Message
 Post subject: ST lba 0 error
PostPosted: July 9th, 2013, 21:35 
Offline

Joined: June 13th, 2013, 5:58
Posts: 52
Location: french
Hi
I want to repair the lba 0 as shown in the salvationdata procedure,
I spin down, remove twezeer and spin up ok
but when i want to reset smart oups i receive the LED: 000000CC error
how to solve?


In Some cases of repair, i have a spin up error efter removing tweezers, what does means?
Thank you


Top
 Profile  
 
 Post subject: Re: ST lba 0 error
PostPosted: July 10th, 2013, 6:39 
Offline

Joined: June 13th, 2013, 5:58
Posts: 52
Location: french
I'll try this afternoon
thank you very very much Spildit


Top
 Profile  
 
 Post subject: Re: ST lba 0 error
PostPosted: July 10th, 2013, 14:12 
Offline

Joined: June 13th, 2013, 5:58
Posts: 52
Location: french
no way friend
still led error
thx


Top
 Profile  
 
 Post subject: Re: ST lba 0 error
PostPosted: July 11th, 2013, 13:46 
Offline

Joined: June 13th, 2013, 5:58
Posts: 52
Location: french
It s a ST9120820AS fw 8.04
thank you


Attachments:
ST9120820AS_8.04.JPG
ST9120820AS_8.04.JPG [ 107.3 KiB | Viewed 16536 times ]
Top
 Profile  
 
 Post subject: Re: ST lba 0 error
PostPosted: July 11th, 2013, 15:40 
Offline

Joined: November 29th, 2006, 10:08
Posts: 7843
Location: UK
It just keeps repeating that?

Try new PCB. (Transfer rom)

_________________
PC Image Data Recovery
http://www.pcimage.co.uk

New!! HDD-PCB.COM for all your PCB and donor HDD requirements!


Top
 Profile  
 
 Post subject: Re: ST lba 0 error
PostPosted: July 11th, 2013, 19:16 
Offline

Joined: June 27th, 2006, 11:33
Posts: 2287
Location: In ur HDD !
This drive is not F3 .
Do what pcimage said .


Top
 Profile  
 
 Post subject: Re: ST lba 0 error
PostPosted: July 11th, 2013, 20:43 
Offline

Joined: June 13th, 2013, 5:58
Posts: 52
Location: french
thank you to all
i try to find a new pcb
i ll keep you informed
thanx


Top
 Profile  
 
 Post subject: Re: ST lba 0 error
PostPosted: July 20th, 2013, 14:28 
Offline

Joined: June 13th, 2013, 5:58
Posts: 52
Location: french
Hello friends
i don t find a pcb to test yet!!!
thx


Top
 Profile  
 
 Post subject: Re: ST lba 0 error
PostPosted: July 25th, 2013, 1:34 
Offline

Joined: February 15th, 2006, 3:38
Posts: 1079
Location: canada
had same error and issue turned out to be a headstack fail.

replace headstack and works fine now

if swapping the rom over then that your issue for sure


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 9 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 9 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group