Switch to full style
Discussions related to SalvationData products
Post a reply

Barracuda help

September 12th, 2014, 8:16

I got a barracuda 2TB drive model no ST2000DM001.Drive gets ready and F3 prompt is reached. but the time I try to read any sector, the drive status changes to error. I tried mo,2,2... and m,6,2... commands but still same problem.When I try to fix sector access command fro 7200.11 menu , error is there saying could not get drive parameters.
Here is terminal message-
Boot 0x40M

Spin Up

Trans.


Spin Up

SpinOK
TCC:0023


(P) SATA Reset


ASCII Diag mode

F3 T>m,6,2,,,,,22
Max Wr Retries = 08, Max Rd Retries = 32, Max Iterations = 3A, Max Certify Rewrite Retries = 29DD

(DOS) File Save

(DOS) File Save

Update HPA Cap and Save
User Partition Format Successful - Elapsed Time 0 mins 00 secs

F3 T>m0,2,2,,,,,22
Max Wr Retries = 08, Max Rd Retries = 32, Max Iterations = 3A, Max Certify Rewrite Retries = 29D1

(DOS) File Save

(DOS) File Save

User Partition Format Successful - Elapsed Time 0 mins 00 secs

F3 T>
ASCII Online mode

TCC:0023

[b]

When I try to detect the drive then this is the error

Dither

Dither
ABORT!
SenseCode = 87270000
ReadyStatusFlags = 0002E1E0

ABORT!
SenseCode = 87270000
ReadyStatusFlags = 0002E1E0



Please suggest what to do?
Thanx

Re: Barracuda help

January 12th, 2016, 11:27

Same disk, same message..

any idea?

ASCII Diag mode

F3 T>m0,6,3,,,,,22
Max Wr Retries = 08, Max Rd Retries = 32, Max Iterations = 3A, Max Certify Rewr
ite Retries = 29DD

(DOS) File Save

Update HPA Cap and Save
User Partition Format Successful - Elapsed Time 0 mins 00 secs

F3 T>/1

F3 1>N1

Clear SMART is completed.
F3 1>

Re: Barracuda help

January 12th, 2016, 11:45

F3 T>i4,1,22

F3 T>m0,6,3,,,,,22
Max Wr Retries = 08, Max Rd Retries = 32, Max Iterations = 3A, Max Certify Rewr
ite Retries = 29D1

(DOS) File Save

User Partition Format Successful - Elapsed Time 0 mins 00 secs

F3 T>/1

F3 1>N1

Clear SMART is completed.

HDD came partitions type is not seem and data couldn't seem.

Re: Barracuda help

January 12th, 2016, 12:15

Success.!

Because of HDD parttions is ext3 windows can't recognise it.
you must clear G-List.
Post a reply