All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 8 posts ] 
Author Message
 Post subject: WDC ROM MODEL-MAMMOTH—
PostPosted: January 3rd, 2015, 14:59 
Offline

Joined: December 27th, 2008, 5:02
Posts: 144
I have WD800JD-00HKA0 its detected as WDC ROM MODEL-MAMMOTH— and serial no: WDC-ROMSN#XYZ.

Pls any advice to fix this problem?

Regards


Top
 Profile  
 
 Post subject: Re: WDC ROM MODEL-MAMMOTH—
PostPosted: January 5th, 2015, 8:57 
Offline

Joined: August 18th, 2010, 17:35
Posts: 3193
Location: Massachusetts, USA
Could be many issues. What is the drive's behavior?

_________________
Hard Drive and RAID Data Recovery Specialist in Massachusetts


Top
 Profile  
 
 Post subject: Re: WDC ROM MODEL-MAMMOTH—
PostPosted: January 5th, 2015, 10:42 
Offline
User avatar

Joined: February 9th, 2009, 16:13
Posts: 2000
Location: Ontario, Canada
1. Not original PCB
2. Damaged PCB
3. Damaged heads
4. Damaged SA
5. A combination of the above

_________________
Luke
RAID Data Recovery


Top
 Profile  
 
 Post subject: Re: WDC ROM MODEL-MAMMOTH—
PostPosted: January 5th, 2015, 12:43 
Offline
User avatar

Joined: August 15th, 2006, 3:01
Posts: 2497
Location: CDRLabs @ Chandigarh [ India ]
redseaksa wrote:
I have WD800JD-00HKA0 its detected as WDC ROM MODEL-MAMMOTH— and serial no: WDC-ROMSN#XYZ.

Pls any advice to fix this problem?

Regards


Hi ,
What All Tools Do You Have At your Disposal Boss

_________________
Regards
Amarbir S Dhillon , Chandigarh Data Recovery Labs
Logical,Semi Physical And Physical Data Recovery
Website-> http://www.chandigarhdatarecovery.com


Top
 Profile  
 
 Post subject: Re: WDC ROM MODEL-MAMMOTH—
PostPosted: January 5th, 2015, 23:41 
Offline

Joined: December 27th, 2008, 5:02
Posts: 144
Amarbir wrote:
redseaksa wrote:
I have WD800JD-00HKA0 its detected as WDC ROM MODEL-MAMMOTH— and serial no: WDC-ROMSN#XYZ.

Pls any advice to fix this problem?

Regards


Hi ,
What All Tools Do You Have At your Disposal Boss


Thank you to all.
Head test is ok .
Tool i used is Salvationdata hdd doctor


Top
 Profile  
 
 Post subject: Re: WDC ROM MODEL-MAMMOTH—
PostPosted: January 6th, 2015, 10:22 
Offline

Joined: August 18th, 2010, 17:35
Posts: 3193
Location: Massachusetts, USA
If PCB is native, then it may be a firmware problem. Try to access SA and see where the issue is.

_________________
Hard Drive and RAID Data Recovery Specialist in Massachusetts


Top
 Profile  
 
 Post subject: Re: WDC ROM MODEL-MAMMOTH—
PostPosted: January 29th, 2015, 2:41 
Offline

Joined: November 11th, 2012, 21:11
Posts: 6
Location: forum savation
You only need auto repair mod 11, 31, 02.

If it does not work you will rewrite for its three mod.


Top
 Profile  
 
 Post subject: Re: WDC ROM MODEL-MAMMOTH—
PostPosted: January 29th, 2015, 4:41 
Offline
User avatar

Joined: January 29th, 2015, 4:04
Posts: 15
Location: Mumbai
You will need a same model HDD.working firmware.hot swap ..stop motor...change donor PCB to patient hdd(PCB removed).....load 11..... power off...on....and if its a 11 mod issue corrected you get data.If its changed PCB or bad sec in firmware or bad 11... you will be unsuccessful.also other causes should be ruled out.
Salvation has this solution on its forum.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 8 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 3 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group