| HDD GURU FORUMS http://forum.hddguru.com/ |
|
| Toshiba hdd get ready but not detect http://forum.hddguru.com/viewtopic.php?f=20&t=30927 |
Page 1 of 1 |
| Author: | eng.mas [ April 11th, 2015, 4:06 ] |
| Post subject: | Toshiba hdd get ready but not detect |
Hi, I have a Toshiba 500GB MK5055GSXN, when connect to DC goes Ready but when I try, for example, read LBA it becomes blocked. On HD Doctor becomes Ready as well but when try to Load from HDD becomes Very Busy and no answer. No answer either from Terminal Mode (got just a strong dot) ... Any ideas? The disk was not dropped, stopped working sudently .... Attachments:  
|
|
| Author: | pcimage [ April 11th, 2015, 4:28 ] |
| Post subject: | Re: Toshiba hdd get ready but not detect |
Could be a suspect head or a firmware issue. Dunno about salvation, but in pc3k one can read LBA via the utility (using a software translator). |
|
| Author: | eng.mas [ April 11th, 2015, 5:40 ] |
| Post subject: | Re: Toshiba hdd get ready but not detect |
islamm3rouf wrote: will be solve but keep it powerd after 5 min will be ready get id and goto translator regeneration and clear g list thanks islamm3rouf and pcimage I keep it powerd 5 min afther that, when I try to Load from HDD, it's give me the same Very Busy and I conn't get id |
|
| Author: | eng.mas [ April 12th, 2015, 1:28 ] |
| Post subject: | Re: Toshiba hdd get ready but not detect |
the problem solved, and I start restore files, but with some block sectors thanks islamm3rouf and pcimage I appreciate your cooperation in this |
|
| Author: | eng.mas [ April 13th, 2015, 4:00 ] |
| Post subject: | Re: Toshiba hdd get ready but not detect |
I connect HDD with HD doctor for toshiba and try to get id, it give me "very busy" after a while "20 min" it turn to ready and then connect Data compass and open HDD from HD doctor for toshiba it's give me the partitions. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|