All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 12 posts ] 
Author Message
 Post subject: Identification problem coused by ROM contents
PostPosted: June 2nd, 2016, 3:09 
Offline
User avatar

Joined: January 1st, 2015, 9:04
Posts: 130
Location: palestine
Hi folks,,

I have cleint HDD WD3200BEVT-00ZCT0, it has a problem with orginal ROM, and ROM is embeded with MCU
So, I used another similar PCB, it's give me Identification problem coused by ROM contents
I can reach to SA, I make a backup for 102,103,105,107,109 by HDD doctor for WD, But Module 103 give me error, not because SA error but it's common failur to load module 103 in this family
I converte the name of module 103 from "ERR-0103" to "0103", and I tried to regenerate ROM using this ROM overlays,
it's give me complete regeneration ROM, but after that it's didn't configure correctlly
I apply that as I read it in one artical as below
"Mod 0103 is not a critical module for drive to work fine. It is used to recover lost ROM together with other modules 01xx.
You don't have to worry about this module.
In a map module in some brand new ROYL drives it stays as module should have length of 2 sectors - 1024 bytes, but inside 0103 mod it is signed as 1 sector -512 bytes that is why LENGTH ERROR occurres.
If You want to use 0103 module for example to regenerate ROM, all You need to do is just take err_0103.mod saved by HD Doctor and use any of hex editors to cut 512 bytes starting from offset 0200 (there should be only 00h or FFh bytes). After this You can save it as 0103.mod and You will have valid 0103 module .
But probably this module is NOT_INIT so it is worth and used for nothing. "

But without success, So How I can rebuild the correct rom by this ROM overlays??

_________________
Expect, the Unexpected


Top
 Profile  
 
 Post subject: Re: Identification problem coused by ROM contents
PostPosted: June 2nd, 2016, 5:07 
Offline
User avatar

Joined: December 8th, 2013, 4:48
Posts: 641
Location: Pakistan
if you can't rebuild the ROM, try to identify ROM version from SA modules and get a copy from hddguru files or ask forum for the same version.

_________________
Data Recovery Pakistan


Top
 Profile  
 
 Post subject: Re: Identification problem coused by ROM contents
PostPosted: June 2nd, 2016, 7:06 
Offline
User avatar

Joined: January 1st, 2015, 9:04
Posts: 130
Location: palestine
MindMergepk wrote:
if you can't rebuild the ROM, try to identify ROM version from SA modules and get a copy from hddguru files or ask forum for the same version.


ROM version is: 000800FA
I attached mod11, mod109


Attachments:
Mod11,109.rar [324.73 KiB]
Downloaded 318 times

_________________
Expect, the Unexpected
Top
 Profile  
 
 Post subject: Re: Identification problem coused by ROM contents
PostPosted: June 2nd, 2016, 7:40 
Offline

Joined: March 19th, 2015, 15:01
Posts: 1288
Location: isreal
http://files.hddguru.com/index.php?acti ... ty/Denali&


Top
 Profile  
 
 Post subject: Re: Identification problem coused by ROM contents
PostPosted: June 2nd, 2016, 7:51 
Offline
User avatar

Joined: January 1st, 2015, 9:04
Posts: 130
Location: palestine
jermy wrote:
http://files.hddguru.com/index.php?action=view&filename=WD3200BEVT-60ZCT1-13.01A13-000800FA-WX20A9914674.rar&directory=PC-3000-UDMA%20Support/WDC%20Marvell%20family%20utility/Denali&


Thanks,,

I'll try it,

_________________
Expect, the Unexpected


Top
 Profile  
 
 Post subject: Re: Identification problem coused by ROM contents
PostPosted: June 4th, 2016, 7:53 
Offline
User avatar

Joined: January 1st, 2015, 9:04
Posts: 130
Location: palestine
I try this ROM, But without success, it's give me the same symptoms "HDD stay Bussy and I can't reach to SA"
But, when I write foreign ROM it's give me Ready with Identification problem and I can reach to SA and make backup for All Module smoothly!

Are any member solve such that problme? it's strange case>>>

_________________
Expect, the Unexpected


Top
 Profile  
 
 Post subject: Re: Identification problem coused by ROM contents
PostPosted: June 4th, 2016, 8:41 
Offline
User avatar

Joined: December 19th, 2006, 8:49
Posts: 8163
Location: Portugal
check RE-LO and G-List. If RE-LO have entries then apply slow fix by patching mod 02.

Check heads as well

_________________
1Q9xrDTzTddUXeJAFRn37aqh1Yr6buDCdw - (Bitcoin Donations)
The HDD Oracle - Platform for OPEN research on Data Recovery.


Top
 Profile  
 
 Post subject: Re: Identification problem coused by ROM contents
PostPosted: June 6th, 2016, 4:40 
Offline
User avatar

Joined: January 1st, 2015, 9:04
Posts: 130
Location: palestine
after check, I thik the problme probably in head
So I will find donor HDD and make headswape

_________________
Expect, the Unexpected


Top
 Profile  
 
 Post subject: Re: Identification problem coused by ROM contents
PostPosted: June 6th, 2016, 4:58 
Offline
User avatar

Joined: December 8th, 2013, 4:48
Posts: 641
Location: Pakistan
eng.mas wrote:
after check, I thik the problme probably in head
So I will find donor HDD and make headswape


problem is with SA as well in my opinion.
you should try smart-hot-swap before swapping heads.

_________________
Data Recovery Pakistan


Top
 Profile  
 
 Post subject: Re: Identification problem coused by ROM contents
PostPosted: June 7th, 2016, 5:01 
Offline
User avatar

Joined: January 1st, 2015, 9:04
Posts: 130
Location: palestine
MindMergepk wrote:
eng.mas wrote:
after check, I thik the problme probably in head
So I will find donor HDD and make headswape


problem is with SA as well in my opinion.
you should try smart-hot-swap before swapping heads.


Ill try to make smart-hot-swap before swapping heads after I got it the donor.

_________________
Expect, the Unexpected


Top
 Profile  
 
 Post subject: Re: Identification problem coused by ROM contents
PostPosted: August 2nd, 2016, 0:50 
Offline
User avatar

Joined: January 1st, 2015, 9:04
Posts: 130
Location: palestine
update:
I recoverd this HDD,, it was issue in firmeware module02..

_________________
Expect, the Unexpected


Top
 Profile  
 
 Post subject: Re: Identification problem coused by ROM contents
PostPosted: August 4th, 2016, 3:40 
Offline

Joined: March 1st, 2016, 2:47
Posts: 5
Location: Hong Kong
Congratulations! Rewrite MOD02 to solve that?


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 12 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group