March 18th, 2015, 16:13
March 18th, 2015, 16:38
March 18th, 2015, 16:40
March 18th, 2015, 17:02
March 19th, 2015, 16:10
March 23rd, 2015, 16:29
April 10th, 2015, 16:44
April 10th, 2015, 20:44
C:\>chksum2 -16 *.bin
1AA011~1.BIN: 262144 bytes checksum16 = 0x0000
1AA011~2.BIN: 262144 bytes checksum16 = 0x0000
April 11th, 2015, 14:25
May 29th, 2016, 15:40
May 29th, 2016, 17:12
SFLASH Ver SF4.24 SAMSUNG (C)1998-2004
--HDD MicroCode Download/Patch Tool (For 16bit DOS)
--Usage: SFLASH <Parameter>[filename] [Parameter]
/DETECT - To detect port drive on
/P:xx - Port Loaction Drive On
:PM - Primary Master (Default) :SM - Secondary Master
:PS - Primary Slave :SS - Secondary Slave
/AUTO - Auto detect all drives when run script
/AUTOLOOP - Go loop of auto detecting drives when run script
/RUN:<filename> - Run Script
/PORT1:aaaa /PORT2:bbbb - Set native port HEX base address
--Example:
A:\SFLASH /DETECT :To detect port the drive on
A:\SFLASH /RUN:SCRIPT.EST :Run Script to PM
A:\SFLASH /RUN:SCRIPT.EST /AUTO :Auto detect all drives and Run Script
May 29th, 2016, 23:43
fzabkar wrote:Does your target drive appear in BIOS? What is its port address?
I believe that SFLASH is looking for your drive on one of the standard ISA ports (0x1F0 or 0x170). If so, and if your drive is on a different port, then perhaps you could explicitly specify the actual port address with the PORT1 and PORT2 parameters.
May 30th, 2016, 15:42
May 31st, 2016, 5:54
May 31st, 2016, 5:55
May 31st, 2016, 15:55
June 12th, 2016, 0:16
June 12th, 2016, 0:17
with our new easy to buy prices)))Spildit wrote:I can fix this with full SHT but you would have to ship the drive to me (Portugal) and pay shipping costs....
June 12th, 2016, 0:19
March 23rd, 2020, 17:43
I would now reconfigure the SATA controller in your BIOS for compatibility or legacy IDE mode. Install your drive on the first SATA port, and disconnect all other drives.
sf.exe -f 1aa17aqm.d38 -s -x -b -v -a 20 -i SAMSUNG
Powered by phpBB © phpBB Group.