HDD GURU FORUMS
http://forum.hddguru.com/

Free training material
http://forum.hddguru.com/viewtopic.php?f=22&t=39755
Page 1 of 1

Author:  poehere [ April 20th, 2020, 17:07 ]
Post subject:  Free training material

To help out during this period of world pandemic I have found all my very old training material. I am handing out this for free right now. Keep in mind this is from 2009 to 2011 and it is older information. They were just course outlines that I had made for the classes I taught. But they are good reference material. I am also handing this out because people have been stealing this information and making training classes and selling it off. So now instead of paying for ripped-off material you can have it for free.

Attachments:
logical recovery chapter 4 [Compatibility Mode].pdf [313.07 KiB]
Downloaded 1830 times
introduction to hard drives 1 [Compatibility Mode].pdf [479.71 KiB]
Downloaded 1748 times
Hard drive Storage 2 [Compatibility Mode].pdf [350.78 KiB]
Downloaded 1617 times
FW and SA chapter 5 [Compatibility Mode].pdf [778.01 KiB]
Downloaded 1800 times
determine HD problems 3 [Compatibility Mode].pdf [81.47 KiB]
Downloaded 1641 times
cast studies chapter 18 [Compatibility Mode].pdf [444.82 KiB]
Downloaded 1684 times

Author:  fzabkar [ April 20th, 2020, 17:40 ]
Post subject:  Re: Free training material

Thanks.

Author:  Arch Stanton [ April 21st, 2020, 5:29 ]
Post subject:  Re: Free training material

Thank you!

Author:  HaQue [ April 21st, 2020, 6:18 ]
Post subject:  Re: Free training material

Thank You!

Author:  jerovsek [ April 22nd, 2020, 1:56 ]
Post subject:  Re: Free training material

Thank you Ann

Author:  samstown [ June 1st, 2020, 11:53 ]
Post subject:  Re: Free training material

Thank you !

Author:  Setlec [ March 12th, 2021, 12:21 ]
Post subject:  Re: Free training material

Thank you!

Author:  Core.iStores [ April 10th, 2021, 9:55 ]
Post subject:  Re: Free training material

thanks a lot

Author:  fabiomaua [ June 27th, 2022, 19:59 ]
Post subject:  Re: Free training material

Thank you!

Author:  terminator2 [ June 27th, 2022, 23:35 ]
Post subject:  Re: Free training material

poehere wrote:
To help out during this period of world pandemic I have found all my very old training material. I am handing out this for free right now. Keep in mind this is from 2009 to 2011 and it is older information. They were just course outlines that I had made for the classes I taught. But they are good reference material. I am also handing this out because people have been stealing this information and making training classes and selling it off. So now instead of paying for ripped-off material you can have it for free.


Thank you so much Ann :good: :-D
This knowledge is indeed priceless. It will help many peoples .
Appreciate all the efforts.

Author:  higgsboson [ June 27th, 2022, 23:55 ]
Post subject:  Re: Free training material

poehere wrote:
To help out during this period of world pandemic I have found all my very old training material. I am handing out this for free right now. Keep in mind this is from 2009 to 2011 and it is older information. They were just course outlines that I had made for the classes I taught. But they are good reference material. I am also handing this out because people have been stealing this information and making training classes and selling it off. So now instead of paying for ripped-off material you can have it for free.


Hi poehere
Thanks. I want to know pricing of latest material . I am keen to buy specific Service area /Firmware related study material as well as firmware repair process using pc3000 ( though ace manual and youtube channel has information available ,it is not comprehensive and covers basic simple cases only)
Actual knowledge comes from self experimentation ,but peoples like me don't have sufficient time for research as being a single one man army we will have to handle all business activities.
I am also keen to outsource my firmware recovery (pc3000 ) remotely as I will get expert technical support.

Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/