HDD GURU FORUMS http://forum.hddguru.com/ |
|
Need help to restore a bricked WD PCB http://forum.hddguru.com/viewtopic.php?f=23&t=37844 |
Page 1 of 1 |
Author: | LoboX [ December 25th, 2018, 13:42 ] |
Post subject: | Need help to restore a bricked WD PCB |
Hello to all. I am trying to fix a PCB, and flash the correct ROM too it, if anyone is willing to help me i am offering $100us. Please PM if you are interested. Thanks. |
Author: | fzabkar [ December 25th, 2018, 16:51 ] |
Post subject: | Re: Need help to restore a bricked WD PCB |
Buy a complete working donor HDD, flash the patient's ROM to it, then transfer the donor's PCB to the patient HDD. That should cost much less than US$100. |
Author: | LoboX [ December 25th, 2018, 17:57 ] |
Post subject: | Re: Need help to restore a bricked WD PCB |
Hello, I know, still would like some help to do the process faster. |
Author: | pclab [ December 26th, 2018, 8:03 ] |
Post subject: | Re: Need help to restore a bricked WD PCB |
With PC3000 you can write ROM using COM port. |
Author: | LoboX [ December 26th, 2018, 9:20 ] |
Post subject: | Re: Need help to restore a bricked WD PCB |
pclab wrote: With PC3000 you can write ROM using COM port. I know, but... its to do it manually, also needs to be done using boot code mode, cause PCB is bricked. |
Author: | LoboX [ December 26th, 2018, 16:07 ] |
Post subject: | Re: Need help to restore a bricked WD PCB |
Hello, Good to know that you have an ebay store, will check yiur store. Thanks. Spildit wrote: A new PCB from any decent provider should cost $50 USD or less with free ROM programming assuming you do still have the original ROM code.
Can you post the PCB number ? Both the sticker and the number engraved on the PCB ? I will check if i do have a PCB for you and i will copy the ROM for you (assuming you do have original ROM file). PCB from me is $5 USD + $10 USD shippiing costs (you can check my eBay store) as long as i do have the PCB that you need (i do have many WD PCBs). |
Author: | LoboX [ December 27th, 2018, 8:54 ] |
Post subject: | Re: Need help to restore a bricked WD PCB |
Hello Hi Spildit the PCB# is 2060-701444-004 REVA, good to know that you have PCB to sell. Cheers. |
Author: | LoboX [ December 27th, 2018, 16:37 ] |
Post subject: | Re: Need help to restore a bricked WD PCB |
Spildit wrote: Happy Happy !!! This time i'm goint to earn some $$$ from LoboX. Oh ... and don't forget the positive feedback ! Hahaha don't you will get the positive feedback |
Author: | LoboX [ December 29th, 2018, 21:18 ] |
Post subject: | Re: Need help to restore a bricked WD PCB |
Heya Spildit Haven’t been able to sit and do it actually, still need to try and unbrick the PCB. Thanks. Spildit wrote: So ... did you end up fixing up the PCB with U-Command or something like that ?
You didn't buy the one that i'm selling so i guess that (once again) you either did get away with a free fix or you were not able to recover the drive ? |
Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |