HDD GURU FORUMS
http://forum.hddguru.com/

Need help to restore a bricked WD PCB
http://forum.hddguru.com/viewtopic.php?f=23&t=37844
Page 1 of 1

Author:  LoboX [ December 25th, 2018, 13:42 ]
Post subject:  Need help to restore a bricked WD PCB

Hello to all.

I am trying to fix a PCB, and flash the correct ROM too it, if anyone is willing to help me i am offering $100us.

Please PM if you are interested.

Thanks.

Author:  fzabkar [ December 25th, 2018, 16:51 ]
Post subject:  Re: Need help to restore a bricked WD PCB

Buy a complete working donor HDD, flash the patient's ROM to it, then transfer the donor's PCB to the patient HDD. That should cost much less than US$100.

Author:  LoboX [ December 25th, 2018, 17:57 ]
Post subject:  Re: Need help to restore a bricked WD PCB

Hello,

I know, still would like some help to do the process faster.

Author:  pclab [ December 26th, 2018, 8:03 ]
Post subject:  Re: Need help to restore a bricked WD PCB

With PC3000 you can write ROM using COM port.

Author:  LoboX [ December 26th, 2018, 9:20 ]
Post subject:  Re: Need help to restore a bricked WD PCB

pclab wrote:
With PC3000 you can write ROM using COM port.


I know, but... its to do it manually, also needs to be done using boot code mode, cause PCB is bricked.

Author:  LoboX [ December 26th, 2018, 16:07 ]
Post subject:  Re: Need help to restore a bricked WD PCB

Hello,

Good to know that you have an ebay store, will check yiur store.

Thanks.

Spildit wrote:
A new PCB from any decent provider should cost $50 USD or less with free ROM programming assuming you do still have the original ROM code.

Can you post the PCB number ? Both the sticker and the number engraved on the PCB ?

I will check if i do have a PCB for you and i will copy the ROM for you (assuming you do have original ROM file).

PCB from me is $5 USD + $10 USD shippiing costs (you can check my eBay store) as long as i do have the PCB that you need (i do have many WD PCBs).

:D

Author:  LoboX [ December 27th, 2018, 8:54 ]
Post subject:  Re: Need help to restore a bricked WD PCB

Hello

Hi Spildit the PCB# is 2060-701444-004 REVA, good to know that you have PCB to sell.

Cheers.

Author:  LoboX [ December 27th, 2018, 16:37 ]
Post subject:  Re: Need help to restore a bricked WD PCB

Spildit wrote:
Happy Happy !!!

This time i'm goint to earn some $$$ from LoboX.

Oh ... and don't forget the positive feedback !

:D



Hahaha don't you will get the positive feedback :)

Author:  LoboX [ December 29th, 2018, 21:18 ]
Post subject:  Re: Need help to restore a bricked WD PCB

Heya Spildit

Haven’t been able to sit and do it actually, still need to try and unbrick the PCB.

Thanks.

Spildit wrote:
So ... did you end up fixing up the PCB with U-Command or something like that ?

You didn't buy the one that i'm selling so i guess that (once again) you either did get away with a free fix or you were not able to recover the drive ?

Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/