HDD GURU FORUMS
http://forum.hddguru.com/

Congratulations on DFL forum!!
http://forum.hddguru.com/viewtopic.php?f=24&t=25493		 Page 1 of 1
Author:  NYtech1970 [ March 8th, 2013, 10:30 ]
Post subject:  Congratulations on DFL forum!!
Great to see this new forum and hope it can really work for getting extra support on using DFL tools!
Expecting to see those who have DFL tools to join in this community and share your tips and experience.

Congratulations!

@1st position!!! :D
Author:  pclab [ March 8th, 2013, 11:33 ]
Post subject:  Re: Congratulations on DFL forum!!
Excelent creation. These tools are great with a great support. At least I think.
Author:  Luiz Brito [ March 8th, 2013, 12:39 ]
Post subject:  Re: Congratulations on DFL forum!!
Congratulations have used his tools and serve me well, excellent support tools expect more soon
Author:  poehere [ March 8th, 2013, 23:42 ]
Post subject:  Re: Congratulations on DFL forum!!
You may come here and request firmware for this tool. Since this tool uses FW from ACE and SD it might make it easier to find some FW you will need.
Author:  w.simon [ March 9th, 2013, 8:45 ]
Post subject:  Re: Congratulations on DFL forum!!
Thanks for this place ! I really appreciate that there is a real help for these tools !!
Author:  poehere [ March 9th, 2013, 18:45 ]
Post subject:  Re: Congratulations on DFL forum!!
Spildit wrote:
Great ! :D

I am very curious what tools do you own for DR. The last time you were here you said this is a hobby for you. I am not sure how you can give all this advise to all these people if you just come here as a hobby. Sorry but I read some of your comments and they are very far off base on this one and seems that you have to answer to all posts here on the forum. This very much reminds me of another person who did this one.
Author:  hddhelp [ March 12th, 2013, 6:39 ]
Post subject:  Re: Congratulations on DFL forum!!
poehere wrote:
I am not sure how you can give all this advise to all these people if you just come here as a hobby. Sorry but I read some of your comments and they are very far off base


Seems like he has been in DR for lot longer than you have, also help he gives is for free, is up to the OP whether or not to go on it. At least he is not updating others manuals and selling them for his own gain :wink:

I dont meant to be rude, but it seems like splidit is just trying to be helpful, whether is advice is good or not, this is an open forum and that is his right to help
Author:  jignesh [ November 16th, 2013, 4:54 ]
Post subject:  Re: Congratulations on DFL forum!!
hddhelp wrote:
poehere wrote:
I am not sure how you can give all this advise to all these people if you just come here as a hobby. Sorry but I read some of your comments and they are very far off base


Seems like he has been in DR for lot longer than you have, also help he gives is for free, is up to the OP whether or not to go on it. At least he is not updating others manuals and selling them for his own gain :wink:

I dont meant to be rude, but it seems like splidit is just trying to be helpful, whether is advice is good or not, this is an open forum and that is his right to help


Dear Friend hddhelp

for this : At least he is not updating others manuals and selling them for his own gain

its not good to blaming on this like saling other menuals miss ann wrote menual by they experiance and knoledge he did not write copy otherwise single menual not saling this way.
i am always writing my all sucessfull case study. i work with sd tools and make case studies my own this is not bad to write it bcoz sd not solved my each and everycases so its our property that we make ourself. if medom ann copy intact of sd menuals then no one buying it. she work hard then sd and give also they experiance and solutions too in menuals. so my as my view she is not doing any bad. and she not forced to buy thair menuals.

yours friend
jignesh pankhania
Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/