View topic - seagate: 0 capacity

Main » Forums home » Forensics

All times are UTC - 5 hours [ DST ]

seagate: 0 capacity

Page 1 of 1

[ 6 posts ]

Previous topic | Next topic

Author

Message

emkanapot

Post subject: seagate: 0 capacity

Posted: November 14th, 2013, 9:57

Joined: September 10th, 2013, 20:13
Posts: 96
Location: Thailand

Hi,

I have Seagate barracuda 7200.12 model: ST3500418AS. I connect to PC. It recognizes as 0 capacity. Then, i connect to imagery. after scan, it reports correct model and serial number but 0 capacity. what problem this hard drive has?

Top

ici_lemmy

Post subject: Re: seagate: 0 capacity

Posted: November 14th, 2013, 10:19

Joined: May 3rd, 2011, 9:52
Posts: 177
Location: France

Seems like the usual bug : translator violation...
Easy with the correct tools or knowledge !

_________________
Lemmy

Top

emkanapot

Post subject: Re: seagate: 0 capacity

Posted: November 14th, 2013, 11:15

Joined: September 10th, 2013, 20:13
Posts: 96
Location: Thailand

ici_lemmy wrote:

Seems like the usual bug : translator violation...
Easy with the correct tools or knowledge !

can you tell me what tools or knowledge?

Top

hddguy

Post subject: Re: seagate: 0 capacity

Posted: November 14th, 2013, 11:31

Joined: November 9th, 2006, 15:15
Posts: 2983

7200.12 have NRG defect list. If you do not know what you are doing, or have no respectable tools for the job, you should not even try it.

Top

emkanapot

Post subject: Re: seagate: 0 capacity

Posted: November 14th, 2013, 14:43

Joined: September 10th, 2013, 20:13
Posts: 96
Location: Thailand

hddguy wrote:

7200.12 have NRG defect list. If you do not know what you are doing, or have no respectable tools for the job, you should not even try it.

thanks for your advice

Top

deftrue

Post subject: Re: seagate: 0 capacity

Posted: December 8th, 2013, 7:52

Joined: October 22nd, 2013, 5:27
Posts: 234
Location: Spain

Spildit wrote:

hddguy wrote:

7200.12 have NRG defect list. If you do not know what you are doing, or have no respectable tools for the job, you should not even try it.

What would be the command to regen translator taking in account the NRG-List ? In other words, what would be the correct command to regen translator on a 7200.12 without damaging it further ?

Good question. I suspect this is done using the format command with FormatOpts = 6. But I'm not sure right now. Start by backing up all defects lists

Top

Page 1 of 1

[ 6 posts ]

Main » Forums home » Forensics

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 21 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum