October 13th, 2018, 2:25
October 13th, 2018, 14:34
October 13th, 2018, 16:31
what are the viable solutions to convert raw drive back to ntfs? the story: i was trying to clone a ddrescued drive using easeus software but as the process was stuck, i interrupt it with end task and the drive turned raw. i read that there is a way to recover the files but if there is anyway to convert the whole drive back to ntfs? thxs all in advance.
Maybe you did clone the other way around (destination to source) and now your data is over-written with the data on the destination drive ?
October 14th, 2018, 8:48
abolibibelot wrote:If that were the case, even if the clone was partial, the system should recognize the partition(s) from the erroneously cloned drive, wouldn't it ? Unless the drive which should have been the destination and turns out to have been wrongly set as source was totally empty, which is unlikely.
October 14th, 2018, 20:52
For safety reasons i NEVER use a drive as destination that was not cleared first. Also i almost never use direct clone and i use image files instead as it's more easy for me to store several images in one big drive rather than using multiple drives.
Powered by phpBB © phpBB Group.